$49.00
Here is our primary adapter that allows the installation of the Doux Tech on the Avenger Bull Pup PCP.
The primary adapter replaces the lower pressure tube adapter allowing the bottle adapter to be installed on the airgun.
You will transfer the o-ring from the Avengers pressure tube to the Primary Adapter.
The installation of the primary adapter and bottle adapter on the Avenger BullPup requires the forward scope rail strut to be flipped 180° to allow the adapter to tube installation. The installation will also require the stock to be carved or ground out to accommodate the new strut location. Please see the photo of our complete TacVenver Bullpup for reference.
| Weight | 2 oz |
|---|---|
| Dimensions | 1 × 1 × 3 in |
You must be logged in to post a review.
300cc, 580cc or 700cc Bottles
Intended for higher power builds
This part replaces part #19 and allows for greater valve dwell producing more power to be produced at higher regulator pressure settings.
The .22 caliber HTVS for the Generation 1 Gauntlet fits both the .177 and .22. Do not order Generation 1 HTVS for the Generation 2 Gauntlet, they are not the same
5/8″-18UNF Threaded Unit
Newly redesigned unit
Now has a high pressure and low pressure burst discs!
Ninja Paintballs’ Flex Reg with Custom Gauntlet Configuration.
Say goodbye to only one fixed output pressure!
The user has an 800PSI adjustment swing!
Requires minor forestock modification.
The regulator thread is 5/8-18UNF
The Ninja Flex regulator is available in any 900PSI spread to a maximum of 3100PSI output but for the Gauntlet select from the proper configuration.
If you select the Custom Configuration, you will need to use the NOTES above to communicate what you want the maximum output to be.
How to read the below configurations
Example: Flex Reg .22 | 4500/1600 to 2400 psi
Flex Reg .22 = Regulator Type for .22 caliber
4500/ = The bottle’s maximum fill pressure
1600 to 2400 psi = The output range of the Flex Reg
Flex Reg Configuration For Generation 1 Gauntlet .177/.22 Cal
Stock .177/.22 | 3000/1100PSI Regulator
Flex Reg .177/.22 |3000/700 to 1500PSI
Flex Reg Configuration For Generation 1 Gauntlet .25 Cal
Stock .25 | 3000/1900PSI Regulator
Flex Reg .25 | 3000/1600 to 2400PSI
Flex Reg Configuration For Generation 2 Gauntlet .22 Cal
Stock .22 | 4500/1900PSI Regulator
Flex Reg .22 | 4500/1600 to 2400PSI
Flex Reg Configuration For Generation 2 Gauntlet .25 Cal
Stock .25 | 4500/2100PSI Regulator
Flex Reg .25 | 4500/1600 to 2400PSI
Flex Reg Configuration For G30 Cal
Stock .30 | 4500/2800PSI Regulator
Flex Reg .30 | 4500/2100 to 3100PSI
Comes with a dedicated Spanner Wrench for power adjustment. MADE IN THE USA!
Fits the G1, G2 or G30
Full-fledged 2-stage trigger for the Umarex Gauntlet 1, 2 or G30. This trigger is a direct replacement for the single-stage trigger that ships with the Umarex Gauntlet. This trigger is a straightforward install that will increase the accuracy of your shooting due to a more predictable and consistent breakpoint.
Please see the installation video below for more details.
Super Tune Kit Users
You must use the stock trigger return spring with the two-stage trigger as the trigger spring that comes with the Super Tune Kit is too light to be effective with the two-stage trigger.
This will close in 20 seconds
Reviews
There are no reviews yet.