Description
Specifications :
Aluminum CNC machined camera latch replacement.
Black anodized to match stock color.
USER MUST REUSE WIRE SPRING HINGE AS IT IS NOT INCLUDED
Â
$14.00
Aluminum Latch Buckle for camera case
Description:
A direct replacement camera case latch buckle but made from aluminum.
This is my aluminum CNC’d camera case latch replacement. Eventually, the lightweight plastic latch that comes on the Firefly Camera case fails and that means your camera is not held in place and you are not able to record your shots through your scope camera assembly. This part requires your original wire hinge piece which typically never breaks.
CLEAR CAMERA CASE NOT INCLUDED. LATCH ONLY
10 in stock
Additional information
| Weight | 1.5 oz |
|---|---|
| Dimensions | 1.5 × 1.5 × .5 in |
You must be logged in to post a review.
You may also like…
-
Sale!
Original price was: $479.00.$385.00Current price is: $385.00.Hajimoto Side Shot for Firefly 8SE 90 Degrees
Original price was: $479.00.$385.00Current price is: $385.00.Add to cartPackage Option: Side Shot Mount with Firefly 8SE 90 Degree Camera
-
Sold out!
Original price was: $245.00.$185.00Current price is: $185.00.Hawkeye Firefly 8SE 4K 90 Degree Distortionless version
Original price was: $245.00.$185.00Current price is: $185.00.Read moreOrders are normally shipped the same day and typically are delivered within 4 days anywhere in the US*
Keep in mind folks, a GoPro 11 will set you back $300-$350 USD plus you need to swap out the lens for another $150USD!
Description:
Brand Name:Â Hawkeye Series
Name:Â Firefly Item Name: 8SE
Version: 90 degrees Distortionless version
Chipset: Ambarella A12S75
Type: Sports Camera
Type of Camera: 4K
Kind of Micro SD card Supported: U3 (Note:Low speed SD card will cause unstable operation)
Maximum Size of Micro SD card Supported: 128G (not included)
Wi-Fi +BT 3.0 Remote Control: Yes
LCD Screen Size: 2 inch IPS 320*240 with TP Lens Diameter: 12mm
Camera Size: 59×41×21mm
Weight: 70g
Battery Capacity(Battery is detachable): 1200mAh, 3.85V Battery Life: About 1.33 hours (25℃ environment)
Time to Complete Charging: About 3 hours (5V 1A power supply, and power off while charging)
Compressed Format: H.264
Video/photo Format: Â *.MP4 / *.JPG
Distortionless Version Diaphrag: F/2.8, 11 glass
Working Voltage: 5V
Power Supply: 1A
Photo Resolution: 16M/14M/12M/8.3M/5M/3M
AV Output Format USB Port: PAL/NTSC
HD Output: Yes
WIFI: YesFeatures:
– Ambarella A12S75 and with SONY IMX117 12 Mega WDR CMOS Sensor.
– 2 inch IPS touch screen, 4K 30fps maximum video resolution, 12MP camera pixels.
– 1200mAh 3.85V high-voltage high-capacity battery, more durable.
– Gyro 2.0 image stabilization,
– Supports WiFi
– Support for Bluetooth connection remote control (not included).Package Includes:- 1 x Camera
- 1 x Waterproof Case
- 1 x Waterproof Case Front Cover Case
- 1 x Bicycle Stand 1 x J Base 4 x Strap
- 1 x Plastic Tie
- 1 x Long Connector with Screws
- 1 x Short Connector with Screws
- 1 x 1/4 inch Adapters Set
- 2 x Mounting Base
- 2 x Adhesive Tape
- 1 x Metal Cable Tie
- 1 x Cleaning Cloth
- 1 x Lens Protection Frame
- 1 x Lens Protective Cover
- 1 x Microphone
- 1x English User Manual
All/any warranties are manufacturer-provided.
English Manual,
Click Here*Typical delivery times are based on the shipping company. Hajimoto Productions is not qualifying the logistics firm’s ability to hit their delivery dates. Just know that we 100% guarantee that the item will ship within 30 hours.
Related products
-
Sale!
Original price was: $18.00.$12.50Current price is: $12.50.Open Door for Firefly 8SE Case
Original price was: $18.00.$12.50Current price is: $12.50.Select optionsDescription:
This skeletonized rear door allows you to use your touch screen without opening the case.Direct replacement no modifications required.
It is recommended that you remove the white silicone gasket on the door so it is easier to close and does not impart too much stress on the hinges or the latch assembly. After all, we are not trying to achieve a waterproof assembly anyway.
*Firefly camera is not included and is shown for reference.
-
$289.00 – $390.00Two Bar or Collet Holder Versions
Eaglevision Scope Cam for GP 5,6,7 Hero Black
$289.00 – $390.00Select options
A very high-quality scope camera unit made to support the GoPro 5,6 or 7. This unit can be ordered in two different image split versions, one that sends 50% to the camera and 50% to the shooter’s eyes to allow for a brighter image to the shooters eye the other version sends 25% to the shooter’s eye and 75% of the image to the camera for the best image capture available. Couple the 25/75 split with the 1/1.8″ 4K lens and you have the best low light scope camera capture that can be had.
Collet Clamp System includes:
- 1 x Side-Cam system including a rubber ring and a 0 coil eye rubber cap. There are two split degree choices, 75% to the camera, (reflection), and 25% passed to your eye, (transmission) Ideal for a professional who aims for a better quality recording, or a 50/50 version.
- 1 x USH-46 the universal scope holder will allow you to connect any of our camera mounting systems to almost any scopes from an outer scope diameter between 40mm-46.5mm.
- 1 x GOPRO Housing 5,6,7 Black + 3x MUN-1 It allows you to connect GOPRO 5, 6 and 7 to your side cam. Scope camera setups such as this one require the stock fisheye lens on the GoPro to be changed to a 12-14mm non distortion lens. Do not use with stock lens.
- 1 x case the new waterproof case will allow you to store your camera mounting system tidy and safe.
- 1 x Lens Air Pump Dust Blower For maintenance of the Side-Cam.
Two Bar System includes:
- 1 x Side-Cam system including a rubber ring and a 0 coil eye rubber cap. There are two split degree choices, 75% to the camera, (reflection), and 25% passed to your eye, (transmission) Ideal for a professional who aims for a better quality recording, or a 50/50 version.
- 1 x 2B-USH which includes:
Scope Tube Holder (34 mm ring ) + 1 x Allen Key and 2 x Thumb Screws
34 mm to 30 mm Ring Adaptor
34 mm to 25 mm Ring Adaptor - 1 x 2B-UCH which includes:
2 x Aluminium Bars (17 mm long)
1 x Camera/Sidecam Ring + 4 x Grab Screws and 1 x Allen Key
2 x Ball Screws
2 x Ball Grab Screws - 1 x GOPRO Housing 5,6,7 Black + 3x MUN-1 It allows you to connect GOPRO 5, 6 and 7 to your side cam. Scope camera setups such as this one require the stock fisheye lens on the GoPro to be changed to a 12-14mm non distortion lens. Do not use with stock lens.
- 1 x case the new waterproof case will allow you to store your camera mounting system tidy and safe.
- 1 x Lens Air Pump Dust Blower For maintenance of the Side-Cam.
Here is a high quality installation video from AirBuks that details the installation process of the Two Bar system.
Here is another video that shows the Eaglevision Scope Cam USH system being installed.
Please be sure to visit his awesome YouTube channel for some really great airgunning content.
-
$14.50 – $34.00Battery Charger for Firefly 8SE
$14.50 – $34.00Select optionsDescription:
Dual Battery Quick Charger for Firefly 8SE Camera Batteries.Available in 3 configurations with or without extra camera batteries.
Use a 5V 2A output USB port to charge 2 batteries.
Reviews
There are no reviews yet.