Air Venturi Avenger

Related products

• 

  $47.00

  Air Stripper, Tension Spring and Baffle Stack

  HP Strip Stak Pak for Avenger

  $47.00

  UPDATE: The newer avengers have a screw-on barrel shroud and an end cap that is a two-piece unscrewable but the STP still fits and works without an issue. unscrew the shroud rather than the little screw shown in the video and simply unscrew the baffle washer array off the end cap and you are good to go.

  Strip Stak Pak for the Avenger

  A six piece kit that includes an efficient multiport air stripper that strips and channels air away from the pellet to allow for a more stable and less turbulent pellet launch from the muzzle. The kit also provides baffle chambers to help remove both noise and turbulence in the air stream. The end result is a more laminar air stream which reduces projectile instability and as a secondary benefit, reduces the report of the rifle. This kit is 100% compatible with the stock end cap or the DonnyFL A50 adapter.
  Air Stripper comes with o-ring and silicone grease for installation. The installation video for the Umarex Origin Strip Stak Pak is exactly the same so you can follow the installation video below.

  Replacement Air Stripper 0-ring is 14mm x 1.5mm

  

  Select options

• 

  From $125.00

  This Builder Starts With the Tactical Adapter

  TacVenger DIY KIT CUSTOM

  From $125.00

  This is where you can build your own TacVenger Kit to install on your existing Avenger.

  Only use this builder if you are including a carbon fiber bottle in the builder because the shipping fees are based on that item as a start. If you only want a couple of items, add them to your cart separately using the parts finder method and not this builder.

  The Kit Starts with the Buck Rail Tactical. We are no longer using the AE Swede Chassis.

  

  then you simply add the items you want in your kit and you are all set!

  The WHT 4-16x16FFP scope comes with, a set of Picatinny scope rings and a Large Focus Wheel.

  Select options

• 

  $33.00

  Avenger/Origin Mini Magazine

  HP Avenger Mini Mag

  $33.00

  Introducing the HP Mini Magazine.

  The same reliable design as our expanded magazine but shorter to allow the mag to fit under your optic without the need to adjust or swap out your scope rings.

  The HP Mini magazine is designed to fit the Avenger and Origin in .22 and .25 calibers. This magazine extends your capabilities by increasing the number of shots before requiring a reload.

  The stands only 40.90mm (1.610″ a little less than 5/8″)

  The NO LID design means you simply rotate the projectile carousel and drop in each round. There is no need to preload the spring, you are winding the spring during the loading process. This fits under high-scope rings and some medium-scope rings. Your scope may need to be moved forward or back to clear the turret bell, maybe

  Features

  • An easy to load NO LID design.
  • No pre-winding is necessary.
  • Easy partial fill design.
  • .22 = 13 shots
  • .25 = 11 shots
  • The magazine height is 40.90mm (1.610″ a little less than 5/8″)
  • Mags also fit the Avenger Bullpup II

  Please note that the actual finish may differ from that shown in the photos.

  WATCH THE VIDEO BELOW ON HOW TO LOAD MAGAZINE

  Select options