Additional information
Weight | 16 oz |
---|---|
Dimensions | 2 × 2 × 8 in |
$30.00
A 3000psi 13ci (213cc) aluminum paintball style tank.
This is an industry standard 5/8″- 18 threaded bottle with a flat bottom.
This is the same bottle installed on the Original Gauntlet 1 in .177, .22 or .25 caliber PCP as shown below.
Airgun is not included
Weight | 16 oz |
---|---|
Dimensions | 2 × 2 × 8 in |
You must be logged in to post a review.
5/8″-18UNF Threaded Unit
Ninja Paintballs’ Flex Reg with Custom Gauntlet Configuration.
Say goodbye to only one fixed output pressure!
The user has an 800 – 900 psi adjustment swing!
Requires minor forestock modification.
The regulator thread is 5/8-18UNF (Bottle Thread) and Typical Paintball Threads of .825-14 NGO (PCP Thread).
Please note the Flex regulator can be used with any Air, Co2, or Nitrogen driven air gun not just the Gauntlet, providing it has the correct threading.
The Ninja Flex regulator is available in any 900 psi spread to a maximum of 3100 psi output. For the Gauntlet, select the proper configuration.
If you select the Custom Configuration, you will need to use the NOTES above to communicate what you want the maximum output to be. Please note that the highest output the Flex Regulator can be configured for is 3100 PSI, but we can build it to any number below that. Example, a user wants the maximum output of their Flex regulator to be 2800, we will build the regulator so that the adjustable range of that build is 1800 to 2800PSI.
How to read the below configurations
Example: Flex Reg .22 | 4500/1600 to 2400 psi
Flex Reg .22 = Regulator Type for .22 caliber
4500/ = The bottle’s maximum fill pressure
1600 to 2400 psi = The output range of the Flex Reg
Flex Reg Configuration For Generation 1 Gauntlet .177/.22 Cal
Stock .177/.22 | 3000/1100PSI Regulator
Flex Reg .177/.22 |3000/600 to 1500PSI
Flex Reg Configuration For Generation 1 Gauntlet .25 Cal
Stock .25 | 3000/1900PSI Regulator
Flex Reg .25 | 3000/1500 to 2400PSI
Flex Reg Configuration For Generation 2 Gauntlet .22 Cal
Stock .22 | 4500/1900PSI Regulator
Flex Reg .22 | 4500/1500 to 2400PSI
Flex Reg Configuration For Generation 2 Gauntlet .25 Cal
Stock .25 | 4500/2100PSI Regulator
Flex Reg .25 | 4500/1500 to 2400PSI
Flex Reg Configuration For G30 Cal
Stock .30 | 4500/2800PSI Regulator
Flex Reg .30 | 4500/2100 to 3100PSI
Comes with a dedicated Spanner Wrench for power adjustment. MADE IN THE USA!
G1 Regulator, 22ci Tank and Barrel Band
Our Gauntlet 1 Power Bundle! For the Umarex Gauntlet 1 in .177, .22 or .25 Calibers (Bundle is not for the Gauntlet 2)
The Bundle Consists of the following:
All for the cost of a regulator alone!
PCP/CALIBER | STOCK PRESSURE | BOOSTED PRESSURE |
G1 .177 | 1100PSI | 1300PSI |
G1 .22 | 1100PSI | 1300PSI |
G1 .25 | 1900PSI | 2100PSI |
Part fits either the original Gauntlet or the Gauntlet 2
You must apply a liberal amount of silicone grease or other synthetic lube on the air strippers o-ring. Failure to do so will cause the o-ring to grip the dry interior of the shroud and cause damage to and break the air stripper. Please read the provided instructions.
Air Stripper comes with o-ring and silicone grease for installation.
FX shows that they are able to innovate not just within airguns themselves, but in other areas of the shooting sports. The FX No Limit scope rings are perfect for long-range shooting as you can vertically adjust and angle your mounts so you can always find the sweet spot on your scope. These rings are also very useful if you need to have your scope higher off the receiver to allow for oversized magazines or scope camera setups.
You will want these rings if you are planning on using my Expanded Magazine.
Reg Pressure Tester
High quality HubenPower reg tester.
Features
Don’t guess what the output of your regulator is, KNOW what it is especially if you are adding shims and need to hit a specific PSI output.
Designed to be used with any Paintball style Regulator that uses the industry-standard G1/2-14 Threads like those shown below.
Copyright All rights reserved Hajimoto Productions LLC 2025
Proudly powered by WordPress . Theme: multipurpose shop by eDataStyle.Please be sure to understand our return policies prior to making your purchases. All products offered on our website are intended for use on airguns only. It is a violation of Federal Law to use a product in a manner inconsistent with its intended labeling or use. It is the purchaser's responsibility to know the ordinances and laws of their state or county and to fully comply with them. Dismiss
Reviews
There are no reviews yet.