Original price was: $390.00.$280.00Current price is: $280.00.
0.7L/700cc CE Certified CF Tank
Perfect fit for your custom build.
M18x1.5 Threaded
If you plan to use this bottle with a Gauntlet, you must remove and leave removed, the tank shroud. This bottle cannot use the flex reg as it is threaded M18.
Consider our barrel bands for the 500cc and 700cc bottles on the Gauntlet found HERE
10 in stock
- Actual Volume:0.70 (L) (700cc)
- Actual Weight:0.65 (KG)
- Certification: CE
- Length: 400mm
- Outer diameter: 61.5mm
- Straight Thread Bottle Mouth:M18x1.5
- Working Pressure: 300 BAR
- Hydraulic Test Pressure: 500 BAR
- Design Working Life: 15 Years
- Re-Test Period: 3 Years
- Fiber Material:Carbon Fiber
- Liner Material: 6061 Aliuminum Alloy
| Weight | 24 oz |
|---|---|
| Dimensions | 15.75 × 2.5 × 2.5 in |
You must be logged in to post a review.
The Hajimoto M18*1.5 Thread can be used on 3000PSI bottles as well. Ninja Paintball is beginning to produce these with a polished brass bonnet. We will be forced to switch over to these polished brass version once all the black steel bonnets are gone.
This regulator is built with the ball/pin and spring removed so hot swapping will not be able to happen.
We do include the ball/pin and spring should you happen to have a thin pin depression system capable of actually opening the valve.
You should never try and unscrew a high-pressure output paintball-style regulator (anything over 1000psi output) while it is under pressure. You will destroy the threads as they are not designed to be threaded on and off under load. Degas and then remove the regulator and bottle.
Take advantage of a quality regulator for your high pressure application. MADE IN THE USA! Ninja HP Metric regulator output pressures in increments of 100PSI. This is a M18 threaded regulator made for M18 threaded bottles. This will not fit Umarex Gauntlet Bottles which are 5/8"-18 Threaded. Simply select your desired output pressure from 1100PSI TO 3100PSI All custom built pressure units will have a +/- 75 psi tolerance. If you need a low output build with a fixed out of of something between 300 psi and 1100 psi, the CUSTOM pessure option and provide the output desired in the notes. If you are looking for a direct replacement for you Gauntlet2 .22, .25 & .30 You will want the 5/8"-18 Version that is found HERE
Air Venturi Avenger Bottle Conversion Barrel Band
 ** YOU MUST MEASURE YOUR CYLINDER TO BE SURE. THE ABOVE ARE TYPICAL SIZES YOURS MAY VARY **
The barrel band is designed by Hajimoto Productions and made from ABS and Carbon Fiber for a strong and lightweight design. The barrel band is designed to live at the end of the cylinder as shown and has a section of Picatinny rail on the bottom to allow for the attacking of a bipod, flashlight, camera, or laser pointer. The Picatinny rail is not designed to support the entire air rifle in a clamp or tripod used in standing rests.
This Barrel band is specifically designed for an Avenger that has the Doux bottle conversation kit installed and a 60.5mm to 63mm diameter cylinder.
Tatsu 1.6 x 4.25 inches
THIS IS AN AIRGUN ONLY PART
This part is designed and manufactured by DonnyFL
Remember to always order your suppressor one size larger for shrouded barrel PCP’s.
If you have a .22 caliber shrouded barrel PCP, you’ll want to order a .25 caliber suppressor.
The .177/.22 is for shrouded barrel .177 or direct barrel threaded PCP’s in .22.
The .22/.25 is for shrouded barrel .22 or direct barrel threaded PCP’s in .25.
The .25/.30 is for shrouded barrel .25 or direct barrel threaded PCP’s in .30. The exception to this rule is the Gauntlet .30 is shrouded but because of the unique end cap, marries the barrel and shroud at the end.
The Tanto, Tatsu, FX, or Sumo are not recommended for the Gauntlet .30 caliber because of the relatively small internal volume of these suppressors and the elevated operating pressures of the G30. We recommend the Ronin be used on all of our G30 Builds.
Part fits either the original Gauntlet or the Gauntlet 2
THESE BAFFLES CANNOT BE USED INSIDE THE DONNYFL SHORT SHROUD.
Regulator Service or Pressure Change
This is a service to repair, test, leak test, adjust or increase the output pressure of a Umarex Gauntlet 1 or 2, regulator to a customer’s requested output. The regulator will be tested and calibrated to within +/- 75 PSI. Parts such as Gauges, Burst discs, Bonnets, Pistons, Caps, or Regulator bodies are not included. If parts are determined to be required to repair the regulator, pricing will be determined, quoted, and will need to be paid prior to the return of the regulator.
Please note that if you have a Taiwan-produced regulator, which is the regulator that is located at the top of the photo, there are very limited corrections that can be made to these units and you may end up needing a new regulator. Please use the notes area to provide the Generation and caliber of the rifle. Also, give as much detail as possible of the issue or the requested pressure output and so forth.
Once the order is physically reviewed, you will receive a second notification with details associated with packaging and shipping the items in for service.
When you place the order for the above-described service, you will receive an order processing notification. Shortly after that, you will receive a detailed notification with the shipping information for you to ship us your regulator or regulator and tank assembly.
This service is not a hydro test of the tank/bottle and is focused only on the regulator’s functionality and visual inspection assemblies.
Please note that this service is not associated with any manufacturer’s warranty, so please be sure to exhaust all warranty options prior to sending us your regulator for service as our working on the part voids any manufacturer-provided warranties.
Reviews
There are no reviews yet.