$239.00
A Hajimoto Productions Exclusive offer!
22.5ci/370cc/.37L CE Certified CF Tank
Newly redesigned with Gauntlet 2’s and G30’s in mind!
Installs on the Gauntlet 2 and G30 as the tank shroud slides right over the carbon fiber cylinder!
This tank shaves off 1/2 a pound of weight on the G2 and G30 airguns.
Use your stock regulator because these tanks are specially manufactured with stock 5/8-18 threads not the M18 threads that are commonly found in the world.
The CF Tank is CE Certified made to ISO 11119-3 standard. They have seamless aluminum alloy 6061 liner wound with high strength Japan-imported carbon fiber and glass fiber reinforced plastic full composite layers and subjected to an autofrettage pressure. This 0.30L carbon fiber 4500PSI cylinder looks mind-blowing on the Gauntlet 2 or G30!
The Gauntlet 2 forearm slides right over without any issue. Please be careful if you have accessories on any of the M-Lok openings as the screws or MLok fasteners may scratch the tank when the shroud is slid forward or back.
Gauntlet 1 Owners
The diameter of the tank is 54-55mm across so a modification to the forearm is required on a Gauntlet 1. I do offer a tank shroud modification service for Gauntlet 1 owners that can be added to a build or provided as a mail-in service.
3 in stock
- Actual Volume: 0.37 (L)
- Actual Weight :0.52 (KG)
- Certification: CE
- Length: 295mm
- Outer diameter: 54mm Nominal
- Straight Thread Bottle Mouth: 5/8"-18UNF
- Working Pressure: 300 BAR
- Hydraulic Test Pressure: 500 BAR
- Design Working Life:15 Years
- Re-Test Period: 3 Years
- Fiber Material: Carbon Fiber
- Liner Material: 6061 Aliuminum Alloy
| Weight | 18 oz |
|---|---|
| Dimensions | 11 × 2 × 3 in |
You must be logged in to post a review.
Flex reg and 22.5ci/370cc/.37L CE Certified CF Tank
Introducing a Hajimoto Productions Exclusive offer!
22.5ci/370cc/.37L CE Certified CF Tank
Newly redesigned unit
Now has a high pressure and low pressure burst discs!
Installs on the Gauntlet 2 with minor tank shroud modifications, forearm slides right over the carbon fiber cylinder. Installation video at the bottom of the page.
The CF Tank is CE Certified and made to ISO 11119-3 standard. They have seamless aluminum alloy 6061 liner wound with high strength Japan-imported carbon fiber and glass fiber reinforced plastic full composite layers and subjected to an autofrettage pressure. This included a 22.5ci carbon fiber 4500PSI cylinder with externally adjustable Ninja Flex Reg for your custom build including the Umarex Gauntlet 1 or Gauntlet 2! The massive volume of air in these 22.5ci tanks is mind-blowing!
The diameter of the tank is 54-55mm across so a modification to the forearm is required on a Gauntlet 1. I do offer a tank shroud modification service for Gauntlet 1 owners that can be added to a build or provided as a mail-in service.
Please be careful if you have accessories on any of the M-Lok openings as the screws or MLok fasteners may protrude into the tank area and scratch the tank when the shroud is slid forward or back. We recommend that if you have any MLok accessories installed, you remove them when sliding the shroud on or off. We also recommend covering the brass inserts in the tank shroud with cloth tape to protect your carbon fiber finish.
The Gauntlet 2 forearm slides right over without any issue. Only one access hole needs to be drilled so the fill port is accessible at the bottom. See photo below
Consider picking up our extended foster fill adapter to make coupling and filling a breeze.
The Power Flex Combo allows the user to externally adjust the regulator output pressure on the fly with an adjustment range of 800PSI!
When installing the Flex regulator on the Umarex Gauntlet. Tighten the degassed tank and regulator assembly fully to the rifle, then back it off until the fill port is on the bottom and the gauges are left and right. Now fill the bottle with air and all will tighten up solid. Proper alignment will be achieved before the 360° maximum rotation limit is realized.
Comes with a dedicated Spanner Wrench for power adjustment. MADE IN THE USA!
Because of practical limitations, regulator output will be +/- 75PSI to the requested output.
This service is to modify the bottle shroud to allow the proper fit for the Power Flex Combo carbon fiber tank and flex regulator:
The service can be added to an existing tune/build or a stand-alone ship in service. If you are shipping me your forestock or bottle shroud be sure to keep the screws, star washers, and sling stud as I will not need those. If you have any type of rail installed for a bipod it needs to be removed prior to shipping me the bottle shroud.
If you select the stand-alone ship service, shipping instructions will follow which detail the packaging and address to ship to.
Cerakote or color change is not included photo is from the 2021 Hajimoto Edition for illustration purposes.
PRESSURE SETTING: G30 2100-3100PSI, TANK PRESSURE: 4500 PSI
This builder starts out with a brand new Gauntlet .30 Caliber SL (Side Lever) and is outfitted the way you want it! It allows for that truly custom build to fit your needs. A minimum of at least one custom builder option is required as we do not sell stock unmodified Gauntlets.
In the Airgun Packages Section, we have our preconfigured packages like the Copper, Silver, Gold, Platinum, or Ultimate Packages but this custom builder tool allows you to outfit a Gauntlet .30 with only the features that interest you giving you the ultimate control over the end build.
Please keep in mind, if you go with the 700 or 500cc tank option the tank shroud cannot be reinstalled due to the increased diameter of these tanks. Only the stock 393cc aluminum tank or the 370cc carbon fiber tank can fit the stock tank shroud.
The 700, or 500cc tank builds are available in fixed regulator configurations only. The Flex Reg is not an option for these sized tanks.
The Flex Reg is only available for the stock 393cc Aluminum or the 370cc Carbon fiber tanks.
0.5L/500cc CE Certified CF Tank
Half a liter of air, right here!
0.5L/500cc CE Certified CF Tank
Perfect fit for your custom build.
M18x1.5 Threaded
This is the same bottle we use on the TacVenger builds we offer.
Important Information:
This builder is used for G30 OWNERS who understand that they will be sending in their G30 to have modifications performed. If you are looking to purchase any of the parts listed below, you will want to leave SERVICE and use the SEARCH for the PART you want.
So you didn’t know we offered turnkey G30 packages? So you already own a G30 and wish you could get were able to have some of the service modifications that are available on some of our Airgun Packages? Well, we got you covered with this G30 specific Service Builder.
This menu system allows you to select what you want or what you don’t want and when you’re done you have a complete turnkey service request for your Gauntlet .30 Caliber!
The shipping you pay at checkout is only a placeholder and the actual shipping fees associated with this order will be adjusted so that you only pay what is required once we receive your package and calculate the actual size and weight of your package. In some cases, you will be required to pay more and in others, you will receive a refund.
Please note that this service is exempt from any discount campaigns.
Reviews
There are no reviews yet.