-
Sold out!
$154.95 – $155.00Ninja High Pressure Metric M18 Custom Output
$154.95 – $155.00Select options
Ninja Paintball is beginning to produce these with a polished brass bonnet. We will be forced to only offer the polished brass version once all the black steel bonnets are gone.
We do include the ball/pin and spring should you happen to have a thin pin depression system capable of actually opening the valve. The only function of this pin/ball is to allow the tank to retain air if it is off of the PCP. This is a paintball thing and should not be used in in HPA.
You should never try to unscrew a high-pressure output paintball-style regulator while it is under pressure. You will destroy the threads as they are not designed to be threaded on and off under load. Degas and then remove the regulator and bottle. Read more in the following article https://hajimotoproductions.com/index.php/2024/11/11/regulator-thread-damage/
The ball and spring are provided but removed from the regulator.
Take advantage of a quality regulator for your high pressure application. MADE IN THE USA! Ninja HP Metric regulator output pressures in increments of 100PSI. This is a M18 threaded regulator made for M18 threaded bottles. This will not fit Umarex Gauntlet Bottles which are 5/8"-18 Threaded. Simply select your desired output pressure from 1100PSI TO 3100PSI All custom built pressure units will have a +/- 75 psi tolerance. If you need a low output build with a fixed out of of something between 300 psi and 1100 psi, the CUSTOM pessure option and provide the output desired in the notes. If you are looking for a direct replacement for you Gauntlet2 .22, .25 & .30 You will want the 5/8"-18 Version that is found HERE
-
Sale!
$360.00 – $419.00Ninja High Pressure Metric M18 Custom Output with Carbon Fiber Tank
Ninja High Pressure Metric M18 Custom Output with Carbon Fiber Tank
$360.00 – $419.00Select optionsAwesome configurations if you don’t care if the Gauntlet bottle shroud stays off. The 700cc on the G30 is beast mode!!!
Ninja Paintball High Pressure Regulator mounted on a quality 0.37L (370 cc), 0.5L (500cc) or 0.7L (700cc) a 4500PSI rated Carbon Fiber Cylinder.
Please be advised that if you use the 370 cc bottle and want to continue to use your stuck bottle shroud, be sure to remove any MSLOT accessories off the tank shroud before sliding it over your new carbon fiber tank as it will scratch it.
Watch my video below that goes over how to modify the brass inserts so they don’t scratch the tank also.
We build the regulator to any custom output pressure in 100 PSI increments from 1100PSI to 3100PSI
All custom built pressure units will have a +/- 75 psi tolerance.
