Tag: M18*1.5

Ninja Paintball is beginning to produce these with a polished brass bonnet. We will be forced to only offer the polished brass version once all the black steel bonnets are gone.

This regulator is built with the ball/pin and spring removed so hot swapping will not be able to happen.

We do include the ball/pin and spring should you happen to have a thin pin depression system capable of actually opening the valve.

You should never try and unscrew a high-pressure output paintball-style regulator (anything over 1000psi output) while it is under pressure. You will destroy the threads as they are not designed to be threaded on and off under load. Degas and then remove the regulator and bottle.

Take advantage of a quality regulator for your high pressure application.

MADE IN THE USA!
Ninja HP Metric regulator output pressures in increments of 100PSI.
This is a M18 threaded regulator made for M18 threaded bottles.
This will not fit Umarex Gauntlet Bottles which are 5/8"-18 Threaded.
Simply select your desired output pressure from 1100PSI TO 3100PSI
All custom built pressure units will have a +/- 75 psi tolerance.

If you need a low output build with a fixed out of of something between 
300 psi and 1100 psi, the CUSTOM pessure option and provide the output
desired in the notes.

If you are looking for a direct replacement for you Gauntlet2 .22, .25 & .30
You will want the 5/8"-18 Version that is found HERE