Tag: FLEX 13CI

  • Gauntlet Flex Reg with 13ci Tank – Hajimoto Configurations
    $169.00

    Flex Reg on 13ci Aluminum 3K

    Gauntlet Flex Reg with 13ci Tank – Hajimoto Configurations
    $169.00

    Introducing a Hajimoto Productions Exclusive offer!

    13ci/213cc/.21L Aluminum Tank 3000PSI
    Newly redesigned unit
    Now has a high pressure and low pressure burst discs!

    Flex 13 Configuration For Generation 1 Gauntlet .177/.22 Cal
    Stock .177/.22 | 3000/1100PSI Regulator
    Flex 22 .177/.22 |3000/700 to 1500PSI

    Flex 22 Configuration For Generation 1 Gauntlet .25 Cal
    Stock .25 | 3000/1900PSI Regulator
    Flex 22 .25 | 3000/1600 to 2400PSI

    Installs on the Gauntlet with minor tank shroud modifications.

    A 13ci aluminum 3000PSI cylinder with externally adjustable Ninja Flex Reg with typical G1/2-14 threads connects to your Umarex Gauntlet 1 or Gauntlet 2 without any modifications!

    The diameter of the tank is 54-55mm across so a modification to the forearm is required on a Gauntlet 1. I do offer a tank shroud modification service for Gauntlet 1 owners that can be added to a build or provided as a mail-in service.

    The Gauntlet 2 forearm slide right over without any issue. Only one access hole needs to be drilled so the fill port is accessible at the bottom.

    Consider picking up our extended foster fill adapter to make coupling and filling a breeze.

    The Power Flex Combo allows the user to externally adjust the regulator output pressure on the fly with an adjustment range of 800PSI!

    When installing the Flex 13 on the Umarex Gauntlet. Tighten the degassed tank and regulator assembly fully to the rifle, then back it off until the fill port is on the bottom and the gauges are left and right. Now fill the bottle with air and all will tighten up solid. Proper alignment will be achieved before the 360° maximum rotation limit is realized.

    Comes with a dedicated Spanner Wrench for power adjustment. MADE IN THE USA!

    Because of practical limitations, regulator output will be +/- 50PSI (3.5bar) within the requested output.

    Select options