Parts - Hajimoto Productions LLC

Price range: $35.00 through $40.00
Airacuda & Airacuda Max .22/.25
Hajimoto’s Airacuda, Expanded Magazine
Price range: $35.00 through $40.00
Here is a high-quality, expanded capacity magazine specifically designed to fit the Airacuda line of PCP’s .22 and .25 calibers. This magazine extends your capabilities by increasing the number of shots before requiring a reload. Please remember we stock adjustable height scope rings by WestHunter, EagleVision, and FX, be sure to snag a set if you are worried about clearance issues plus adjustable rings allow you to keep your scope optically centered leaving all the turret adjustment-free to use when you need it for distance shooting.

The NO LID design means you simply rotate the projectile carousel and drop in each round. There is no need to preload the spring, you are winding the spring during the loading process. This fits under high-scope rings and some medium-scope rings. Your scope may need to be moved forward or back to clear the turret bell

Features
- An easy to load NO LID design.
- No pre-winding is necessary.
- Easy partial fill design.
- .22 = 17 shots which is an increase of 70% more shots over the stock magazine!
- .25 = 15 shots which is an increase of 87.5% more shots over the stock magazine!
- The magazine height of the Expanded mag for .22/.25 is 50.25MM (1.978″)
- The magazine height of the Mini mag for .22/.25 is 46.00MM (1.811″)
- Available in right-side loading for the .22 caliber soon to come for the .25 cal.
WATCH THE VIDEO BELOW ON HOW TO LOAD MAGAZINE
Select options
$35.00
Replacement end caps
Emperor/Ronin End Caps
$35.00

THIS IS AN AIRGUN ONLY PART

Interchangeable rear endcaps for the latest model of Ronin and Emperor. Works with models with the grooves in the front cap.

Select options
$40.00
For the Gauntlet 1 or 2
Umarex Gauntlet 1/2 x 20 adapter #A23
$40.00

This part is designed and manufactured by DonnyFL

Select options
Sold out!
$40.00
Liberty/Aspen/Avenger/Origin 1/2 x 20 #A50
$40.00

Fits the Nova Liberty, Aspen, AV Avenger, and Origin PCP’s

This is a direct replacement end cap that when installed provides 1/2 x 20 UNF threads to allow the installation of your favorite moderator or suppressor. If you are looking for a better and stiffer barrel to barrel shroud connection that helps eliminate point-of-impact changes or projectile clipping issues, consider going with the A70 Adapter which essentially marries the barrel to the shroud.

If you are a Hajimoto Productions Strip Stak Pak (SSP) user, then stick with the A50 because the A70 will not work with the SSP.

This part is designed and manufactured by DonnyFL

Read more
$40.00
Hatsan Bullmaster | Invader | Galatian 1/2 x 20 Moderator Adapter #A35
Hatsan Bullmaster/Galatian with 1/2 x 20 UNF and thread adapter #A35
$40.00

Please note that when a suppressor is added to these semi-auto types of PCP, it sometimes does not properly index the magazine. If you plan to single load and use a suppressor, that’ll be fine. I would also recommend using a suppressor one caliber size up to reduce the chance of pellet clipping.

Select options
$40.00
Hatsan Blitz M18X1 Adapter A117
$40.00

This part is designed and manufactured by DonnyFL

This adapter allows you to screw on an airgun suppressor with M18x1 threads.

Select options
$40.00
1/2 x 20 UNF Adapter for Akela/Kratos
Benjamin Akela/Kratos 1/2 x 20 Adapter A8
$40.00

Fits the Benjamin Akela and Kratos PCP’s

This part is designed and manufactured by DonnyFL

Select options
$40.00
Akela/Kratos Strip Stak Pak
HP Strip Stak Pak for Akela/Kratos
$40.00

INCLUDES NEW ENHANCED AIR STRIPPER DESIGN
For .177 and .22 Caliber Only

Strip Stak Pak for the Benjamin Akela and Kratos PCP’s
A nine-piece kit that includes an efficient multiport air stripper that strips and channels air away from the pellet to allow for a more stable and less turbulent pellet launch from the muzzle.

The kit also provides variable-sized baffle chambers to help remove both noise and turbulence in the air stream. The end result is a more laminar air stream which reduces projectile instability and as a secondary benefit, reduces the report of the rifle. This kit is 100% compatible with the stock end cap or the DonnyFL A8 adapter.
The Air Stripper is threaded and comes with an o-ring and silicone grease for installation. The stock barrel shroud spring must be reused.

Replacement Air Stripper 0-ring is 14mm x 1.5mm

Select options
Sold out!
$40.00
Marauder, Armada and Fortitude
Benjamin 1/2 x 20 adapter #A7
$40.00

This part is designed and manufactured by DonnyFL

Read more
$40.00
Hammer Adapter
Umarex Hammer M18x1 Shroud Adapter A60
$40.00

This adapter replaces the factory shroud baffle and has M18x1 threads. Comes with thread protector

This adapter does not fit on the Umarex Hammer Carbine.

Select options
$45.00
for .177, .22 and .25 NOT .30
Umarex Gauntlet Strip Stak Pak (Bundle)
$45.00

Hajimoto Productions Strip Stak Pak for the Gauntlet 1 or 2. Not compatible with the Gauntlet .30 Caliber.
An efficient multiport air stripper that strips and channels air away from the pellet to allow for a more stable and less turbulent pellet launch from the muzzle. The HP Air stripper 2.0 comes with an o-ring. The kit also provides variable baffle chambers to help remove both noise and turbulence in the air stream. The end result is a more laminar air stream which reduces projectile instability and as a secondary benefit, reduces the report of the rifle.

BAFFLES CAN NOT BE USED WITH DONNYFL SHORT SHROUD
Because the Short Shroud is cut at a length that is a perfect fit for the air stripper and the spring. There is not any room for the baffles in the DonnyFL Short Shroud.

Air Stripper comes with o-ring and silicone grease for installation.

Select options
$45.00
Hatsan QE 1/2 x 20 adapter #A24
$45.00

This part is designed and manufactured by DonnyFL

Select options