Parts - Hajimoto Productions LLC

Sold out!
$40.00
Hatsan Blitz M18X1 Adapter A117
$40.00

This part is designed and manufactured by DonnyFL

This adapter allows you to screw on an airgun suppressor with M18x1 threads.

Read more
$40.00
1/2 x 20 UNF Adapter for Akela/Kratos
Benjamin Akela/Kratos 1/2 x 20 Adapter A8
$40.00

Fits the Benjamin Akela and Kratos PCP’s

This part is designed and manufactured by DonnyFL

Select options
Sold out!
$40.00
Akela/Kratos Strip Stak Pak
HP Strip Stak Pak for Akela/Kratos
$40.00

INCLUDES NEW ENHANCED AIR STRIPPER DESIGN

Strip Stak Pak for the Benjamin Akela and Kratos PCP’s
A nine-piece kit that includes an efficient multiport air stripper that strips and channels air away from the pellet to allow for a more stable and less turbulent pellet launch from the muzzle. The kit also provides variable-sized baffle chambers to help remove both noise and turbulence in the air stream. The end result is a more laminar air stream which reduces projectile instability and as a secondary benefit, reduces the report of the rifle. This kit is 100% compatible with the stock end cap or the DonnyFL A8 adapter.
The Air Stripper is threaded and comes with an o-ring and silicone grease for installation. The stock barrel shroud spring must be reused.

Replacement Air Stripper 0-ring is 14mm x 1.5mm

Read more
$40.00
Marauder, Armada and Fortitude
Benjamin 1/2 x 20 adapter #A7
$40.00

This part is designed and manufactured by DonnyFL

Select options
$40.00
Hammer Adapter
Umarex Hammer M18x1 Shroud Adapter A60
$40.00

This adapter replaces the factory shroud baffle and has M18x1 threads. Comes with thread protector

This adapter does not fit on the Umarex Hammer Carbine.

Select options
$45.00
for .177, .22 and .25 NOT .30
Umarex Gauntlet Strip Stak Pak (Bundle)
$45.00

Hajimoto Productions Strip Stak Pak for the Gauntlet 1 or 2. Not compatible with the Gauntlet .30 Caliber.
An efficient multiport air stripper that strips and channels air away from the pellet to allow for a more stable and less turbulent pellet launch from the muzzle. The HP Air stripper 2.0 comes with an o-ring. The kit also provides variable baffle chambers to help remove both noise and turbulence in the air stream. The end result is a more laminar air stream which reduces projectile instability and as a secondary benefit, reduces the report of the rifle.

BAFFLES CAN NOT BE USED WITH DONNYFL SHORT SHROUD
Because the Short Shroud is cut at a length that is a perfect fit for the air stripper and the spring. There is not any room for the baffles in the DonnyFL Short Shroud.

Air Stripper comes with o-ring and silicone grease for installation.

Select options
$45.00
Hatsan QE 1/2 x 20 adapter #A24
$45.00

This part is designed and manufactured by DonnyFL

Select options
$45.00
Regulator Service or Pressure Change
Regulator Service or Pressure Change
$45.00

This is a service to repair, test, leak test, adjust or increase the output pressure of a Umarex Gauntlet 1 or 2, regulator to a customer’s requested output. The regulator will be tested and calibrated to within +/- 75 PSI. Parts such as Gauges, Burst discs, Bonnets, Pistons, Caps, or Regulator bodies are not included. If parts are determined to be required to repair the regulator, pricing will be determined, quoted, and will need to be paid prior to the return of the regulator.

Please note that if you have a Taiwan-produced regulator, which is the regulator that is located at the top of the photo, there are very limited corrections that can be made to these units and you may end up needing a new regulator. Please use the notes area to provide the Generation and caliber of the rifle. Also, give as much detail as possible of the issue or the requested pressure output and so forth.

Once the order is physically reviewed, you will receive a second notification with details associated with packaging and shipping the items in for service.

When you place the order for the above-described service, you will receive an order processing notification. Shortly after that, you will receive a detailed notification with the shipping information for you to ship us your regulator or regulator and tank assembly.

This service is not a hydro test of the tank/bottle and is focused only on the regulator’s functionality and visual inspection assemblies.

Please note that this service is not associated with any manufacturer’s warranty, so please be sure to exhaust all warranty options prior to sending us your regulator for service as our working on the part voids any manufacturer-provided warranties.

Select options
$45.00
Air Venturi Avenger Extender 1/2 x 20 Adapter #A70
$45.00

Specifically for the AV Avenger

Not to be used with the Hajimoto Productions Strip Stak Pak (SSP) which is an Air stipper. Spring and Baffle Stack.

This part is designed and manufactured by DonnyFL

Select options
$45.00
HP Strip Stak Pak for PP750
$45.00

Strip Stak Pak for the Artemis PP750
A five (5) piece kit that includes an efficient multiport air stripper that strips and channels air away from the pellet to allow for a more stable and less turbulent pellet launch from the muzzle. The kit also provides baffle chambers to help remove both noise and turbulence in the air stream. The end result is a more laminar air stream which reduces projectile instability and as a secondary benefit, reduces the report of the rifle.
Air Stripper comes with o-ring and silicone grease for installation. Not available for Canada

Select options
$45.00
Umarex Origin 1/2 x 20 Adapter #A70
$45.00

Specifically for the Umarex Origin

Not to be used with the Hajimoto Productions Strip Stak Pak (SSP) which is an Air stipper. Spring and Baffle Stack.

This version allows you to use a larger suppressor than the Tanto or KOI. Designed to slide over the barrel to keep the barrel centered with the adapter. This reduces the chance of pellet clipping and improves accuracy.

This part is designed and manufactured by DonnyFL

Select options
$45.00
Bipod Picatinny
ATLAS LIKE Bipod
$45.00

Atlas Like Bipod

Select options