Parts

Artemis Parts and Mods (2)
Evanix Parts/Mods (2)
Hatsan Parts/Mods (6)
JTS (1)
Liberty/Aspen/Avenger Parts/Mods (19)
Regulators & Tanks (55)
RTI Parts/Mods (2)
Saber Tactical (3)
Umarex Parts/Mods (79)
50 to 250
For either G30 or G30SL
G30 Barrel Service Lab
50 to 250
Select options
$4.00
Ninja fill port o’ring
Fill Port O’ring Fits Ninja
$4.00

5 Dura 90 fill port o’rings that are a direct replacement for most Ninja Paintball regulators

Select options
$7.00
Gauntlet Barrel Baffle Spring
Umarex Gauntlet Baffle Spring
$7.00

Umarex Gauntlet .177, .22, or .25 Baffle Spring.

Part is not compatible with Gauntlet .30 Caliber

This is the spring that lives in your Gauntlets Shroud. It is required to keep the air stripper on the end of the barrel and allows the baffle or baffle stack to live under tension.

Select options
$8.00
Tank to PCP O-rings (10 Pak)
$8.00

10 Polyurethane CO2 / HPA Tank O-Rings (90 Durometer) The color is completely dependent on availability which will be RED or WHITE/TRANSLUCENT

Select options
$9.95
Burst Disk Two Pack
Regulator Burst Disks 1.8k, 3k, 5k & 7.5k
$9.95
- 1.8k burst disk is used as the low-pressure burst disk on 3k and 4,5k tanks
- 3k burst disk is used as the low-pressure burst disk on 3k and 4,5k tanks
- 5k burst disk is used as the high-pressure burst disk on 3k tanks
- 7.5k burst disk is used as the high-pressure burst disk on 4.5k tanks
Actual burst disk finish may be Black, or Bright depending on availability. The Flex Reg Above is an example of 5K and 7.4K Burst Disks.

The Flex Reg Above is an example of 5K and 7.5K Burst Disks.
Select options
Sale!
Original price was: $14.99.Current price is: $9.99.
QD PORT SLING SWIVEL AND BASE
Original price was: $14.99.Current price is: $9.99.

QD Sling Mount Sling Swivel Quick Detach Release Push Button QD Sling Swivels for MLOK SLOTS.

Quick Disconnect

Select options
$11.00
A2 Pistol Grip
GRIP
$11.00

A2 Pistol Grip – Features a textured surface for a secure and non-slip grip, even in wet or slippery conditions. Provides a comfortable hold, reducing fatigue and ensuring a more accurate shot placement.

Material: Dupont Zytel 30% glass filled nylon

Made in the USA

Select options
$12.00
for .177, .22 and .25 NOT .30
Umarex Gauntlet Aluminum Air Stripper
Rated 5.00 out of 5
$12.00

This part is for the Umarex Gauntlet 1 or 2 in .177, .22, or .25 Calibers.

Part does not fit Gauntlet .30 caliber

This part is designed and manufactured by DonnyFL

Select options
$13.00
Fits Notos / HajiNotos
NOTOS FIBER OPTIC SIGHTS
$13.00
The Umarex Notos was designed to be flexible to your shooting needs. The Notos has plenty of accessory rail on the top side of the rifle allowing shooters to install the optic of their choice or, a set of fixed sights. The high-contrast Fiber Optic elements pick up plenty of available light for quick accurate shooting in all lighting conditions. These Fiber Optic sights can be installed in just minutes.
Umarex Notos Fiber Optic Sights

Front and Rear Fiber Optic Sights

Compatible with Umarex Notos PCP Airgun

NOT COMPATIBLE WITH HAJIMOTO MAGAZINE FOR THE NOTOS
Select options
Sale!
Original price was: $17.95.Current price is: $14.00.
Stock Umarex Magazine
Umarex Gauntlet Rotary Magazine
Original price was: $17.95.Current price is: $14.00.
The Gauntlet Rotary Magazine advances each pellet with the operation of the bolt on the Umarex Gauntlet PCP air rifle.

Features
- .177 = 12 shots
- .22 = 10 shots
- .25 = 8 shots
- .30 = 7 shots
Select options
$15.00 – $70.00
Bipod and Picatinny Rail
$15.00 – $70.00

Installation Video for 1.5″ Picatinny rail on the Umarex Gauntlet forearm.

Select options
$17.00
Gauntlet 1 and Gauntlet 2
Umarex Gauntlet Tune O-ring Kit
$17.00
Hajimoto Productions Tuning O-ring kit for the Gauntlet and Gauntlet 2

Now includes my “NO RING” pellet probe seals as HP-1 rather than the typical high wear donut orings.

I have put together the most common o-rings that fail during a tuning session. Most of the stock o-rings for the internals will gouge when the airgun is disassembled, this kit will allow you multiple attempts should any of the o-rings fail. Please note that the .30 caliber uses completely different internal o-rings than all previous Gauntlet Models including the .30 cal exclusive transfer port orings Which will be bagged as TP.

Some of the NO-Ring seals have the leading edge precision ground.

These tapered / precision ground types need to be installed as shown below

(Images are of the .30 caliber NO RING)

You get:
- 2 of pellet probe NO-ring seals.
- 2 sets of barrel o-rings.
- 2 sets of tank block o-rings.
- 2 of valve body o-rings.
Select options

Artemis Parts and Mods (2)

Evanix Parts/Mods (2)

Hatsan Parts/Mods (6)

JTS (1)

Liberty/Aspen/Avenger Parts/Mods (19)

Regulators & Tanks (55)

RTI Parts/Mods (2)

Saber Tactical (3)

Umarex Parts/Mods (79)