Airgun Packages

$110.00
MDSR1 Micro Dot Sight with Riser
Axeon Optics
$110.00
Featuring a one-power magnification, the MDSR1 Red Dot Sight from Axeon is a compact, ruggedly durable optical solution for your MSR platform that delivers high performance in a low or no maintenance package. The MDSR1 features a 20mm objective lens and a remarkable single CR2032 battery life of thirty thousand hours using the auto shut-off feature. The MDSR1 comes ready to mount with an included co-witness riser base, and the windage and elevation adjustments are one-half MOA increments. Small but highly efficient, this Axeon Optics MDSR1 Red Dot offered by Axeon Optical Solutions is an affordable solution that will give you an ultimate sight advantage at a price that won’t trouble your pocketbook.

Features:
- 1X Magnification
- 20mm Objective
- Red Dot LED Reticle
- .50 MOA Adjustment Size
- Adjustable Windage and Elevation
Select options
$110.00
Barrel Service Notos
Notos Barrel Service
$110.00
Notos Barrel Service

This is what we do to our Haji-Notos Custom Builds. but you can have the same service performed on your Notos barrel as well. The Transfer port work increases the port and polishes the opening to allow greater airflow to produce more power more efficiently.

You ship us your Notos Barrel and we execute the following:
- Remove the fixed molded plastic suppressor (the suppressor is destroyed in the process).
- Increase and polish the barrel transfer port.
- Two new barrel o-rings are provided.
- Clean up and polish the barrel crown.
- 1/2 x 20 UNF Threaded Adapter Included.
- Barrel Shroud End Cap and Barrel Guide Included.
- Thoroughly clean and silicone barrel bore.
Notos Barrel Removal

Your Barrel is very easily removed by removing the 2.5mm button head screw on top of the Picatinny rail near the magazine opening. Once the 2.5mm screw is removed, there is a 2mm set screw below it that holds the barrel into the receiver block. Loosen the 2mm screw four revolutions and slide out the barrel.

Shipping

When you place the order for the above-described service, we will send you an order processing notification with a copy of your invoice. Shortly after that, you will receive a detailed notification with the shipping information for you to ship us your barrel for modification.
Select options
From $125.00
This Builder Starts With the Tactical Adapter
TacVenger DIY KIT CUSTOM
From $125.00

This is where you can build your own TacVenger Kit to install on your existing Avenger.

Only use this builder if you are including a carbon fiber bottle in the builder because the shipping fees are based on that item as a start. If you only want a couple of items, add them to your cart separately using the parts finder method and not this builder.

The Kit Starts with the Buck Rail Tactical. We are no longer using the AE Swede Chassis.

then you simply add the items you want in your kit and you are all set!

The WHT 4-16x16FFP scope comes with, a set of Picatinny scope rings and a Large Focus Wheel.

Select options
Sale!
$135.00 – $140.00
360CC 4.5K PSI M18 Threaded CF Tank
0.36L M18 Thread Carbon Fiber Tank
$135.00 – $140.00
Features
- Lightweight High Pressure Carbon fiber Cylinder
- 360cc/0.36L capacity
- Available in Gloss Or Matte
- 9″ x 2.4″ (228mm x 61.5mm)
- M18 Threaded
Shown Below On the HajiNotos
Select options
$139.99
For G1, G2/22, G2/25, G30, SL22, SL25 or SL30
Gauntlet Tactical Conversion Kit
Rated 5.00 out of 5
$139.99
Introducing a Buck Rail and Hajimoto Collaboration! A super strong tactical conversion kit for the Umarex Gauntlet!
- Laser Sintered Nylon construction. LIFETIME WARRANTY
- Made in the USA by a veteran-owned business
- Add an AR Pistol Grip and Adjustable Buttstock to your Gauntlet
- Compatible with Gauntlet G1, G2, and SL30
- Accepts Milspec or Commercial AR15/AR308 Extension Tubes
- Handguard accepts M Lok accessories
- Over 1 pound of weight savings over OEM stock
Accessory options include a Grip, Buffertube, and Collapsable Butt Stock

Installation video is listed below
Select options
Sale!
Original price was: $175.00.Current price is: $160.00.
The Haji-Notos Power Plant
Huben Power – Dream-Notos TK
Original price was: $175.00.Current price is: $160.00.
Genuine Huben Power Regulator with Power Plenum

This is the Power Plant that we use for our Haji-Notos build. It allows for precise power adjustment allowing the Notos to deliver only the power required for the situation. If you want to shoot pest birds in a barn or feed house, you can dial it back to fly pellets as low as 400 ft/s, or if you are hunting grey squirrels and want to deliver a JSB Hades 15.89 gr at over 750 ft/s you can do that too.

FEATURES
- Externally adjustable Regulator Output 500psi~3600psi
- Ultra-stable output pressure
- Power Plenum with rotatable joint for perfect clocking, locked in place with set screws.
- Standard 8mm quick disconnect male foster fitting adapter for filling.
- Built-in Picatinny Rail Section for Bipod or Tripod Shooting.
- Tank Threads : M18*1.5
- Power Increase on the fly but decrease requires degassing the plenum.
** BE SURE TO READ DETAILS BELOW **
Select options
Sale!
$275.00 – $305.00
Huben Power Dream-Notos TK with 0.30L or 0.36L CF Tank
Haji-Notos Power Plant Combo
$275.00 – $305.00
Genuine Huben Power Dream-Notos TK mounted on a.30L (300cc) or 0.36L (360CC)

A complete Haji-Notos Power Plant Combo. It allows for precise power adjustment allowing the Notos to deliver only the power required for the situation. If you want to shoot pest birds in a barn or feed house, you can dial it back to fly pellets as low as 400 ft/s, or if you are hunting grey squirrels and want to deliver a JSB Hades 15.89 gr at over 750 ft/s you can do that too.

FEATURES
- Includes 0.30L or 0.36L 4500psi Carbon Fiber Bottle in Gloss or Matte Black.
- Extremely stable externally adjustable regulator Output 500psi~3600psi
- Provides over 130 shots.
- Ultra-stable output pressure
- Power Plenum with rotatable joint for perfect clocking, locked in place with set screws.
- Standard 8mm quick disconnect male foster fitting adapter for filling.
- Built-in Picatinny Rail Section for Bipod or Tripod Shooting.
- Power Increase on the fly but decrease requires degassing the plenum.
See details below
Select options
Sale!
Original price was: $299.99.Current price is: $279.00.
Arrow Shooter
Umarex AirJavelin Pro
Original price was: $299.99.Current price is: $279.00.

Introducing the newest PCP arrow rifle—the Umarex AirJavelin Pro! Mirroring most of the same features as the original AirJavelin CO2 arrow rifle, like the integrated Picatinny rail and M-LOK® slots, ambidextrous bolt handle, and collapsible stock, the AirJavelin Pro and original AirJavelin do have some key differences. The new AirJavelin Pro notably features an all-new FDE stock, a 4,500 psi high-pressure air reservoir, and Foster quick connect fill port. It’s a PCP regulated at 1500 psi meaning 25 consistent shots on a full tank of air. The AirJavelin Pro arrow airgun is comfortable and lightweight while still launching a 170 gr Umarex arrow downrange at a whopping 52 ft-lbs.

For the AirJavelin Pro, it was decided that a pressure increase of nearly twice that of the original AirJavelin CO2 air rifle would give the arrow a big jump in power without compromising the integrity of the High-Pressure Shaft technology arrow or the AirJavelin. The ingenious 7.4 cubic inch tank design has a regulated pressure of 1,500 psi and only takes 7 minutes to fill with the Umarex ReadyAir Portable Airgun Compressor. This easy-to-fill PCP arrow airgun fills directly through a male Foster quick disconnect fitting to a pressure of 4,500 psi giving it a shot count of up to 25 ethical shots on just one fill!

‌

The AirJavelin Pro easily breaks the threshold of the lowest energy produced by a traditional bow. At 52 ft-lbs the AirJavelin Pro is capable of taking on game animals like the whitetail deer at close range.

$319.99 MSRP

Add to cart
$877 to $1935.94
Build your own TacVenger
TacVenger Build Your Own
$877 to $1935.94

The TacVenger Base is for the person that wants to custom select how their package is built. The Base TacVenger Includes a New Avenger, Tactical Chassis, AR-Grip, Collapsable Butt Stock, Buffer Tube, and HP Barrel band.

You select, Optic, Scope rings, Suppressor, Shroud Adapter, Barrel Adapter, Power Plenum, Bipod, Magazines or Tune services. This builder allows for the most flexibility of options that suit your specific needs.

Tuning option is available as well, you get to choose from Lots Of Shots, Balanced, or Lots Of Power, build strategies.

We thoroughly check all the functionality of the rifle, fill it with air and after 24 hours if there are zero leaks, we build your TacVenger Platinum!

No additional modifications other than what is listed in the details down below are performed on the air rifle.

You receive a fully assembled, tested, and proven TacVenger Platinum leaving the only thing you need to do is find time to get out there and shoot it!

Remember you can always supplement this package by adding any other items you want so you are making your own package with only the items you want or need.

Select options
Sale!
$400.00 – $420.00
Umarex Gauntlet – Copper Package
$400.00 – $420.00
All Gauntlet 1 Packages now come with an upgraded large 22ci tank!

I supply you with an Umarex Gauntlet which includes an installed Super Tune Kit.
The rifle will be adjusted to fly the best JSB pellet at the most accurate speed of 860 to 880 feet per second.
For the .22 I will be using JSB 15.89 grain pellets
For the .25 I will be using JSB 25.39 grain pellets
See below for a detailed break down of what is included.

Ordering procedures:

Place all the items in the cart that you are interested in and use the notes section to communicate any special instructions. Once the order is received you will receive any shipping information if you are sending in your Gauntlet for a tune. If you are buying a Gauntlet with a tune from me you could do something along the lines of the Example below:
- 1 .25 Caliber Hajimoto Tuned Gauntlet
- 1 Bipod and Mount
- 1 DonnyFL Short Shroud with Sumo
- 1 22ci Tank with the regulator set to 2100PSI
Please use the notes section to communicate any special requests or information:

When I receive this order, I will build it based on the information you provided and before the airgun will ship, any credits or additional charges will be issued/settled based on customer requests or items provided in the notes.

Here is a video that demonstrates how the power adjuster works if you should want to increase or decrease the power output for any given ammunition.
HOW TO ADJUST POWER WITH STK
Select options
Sale!
.
Gauntlet 30 SL Custom Builder
.

Hajimoto Productions Gauntlet .30 SL Custom Builder

This builder starts out with a brand new Gauntlet .30 Caliber SL (Side Lever) and is outfitted the way you want it! It allows for that truly custom build to fit your needs. A minimum of at least one custom builder option is required as we do not sell stock unmodified Gauntlets.

In the Airgun Packages Section, we have our preconfigured packages like the Copper, Silver, Gold, Platinum, or Ultimate Packages but this custom builder tool allows you to outfit a Gauntlet .30 with only the features that interest you giving you the ultimate control over the end build.

Please keep in mind, if you go with the 700cc or 500cc tank option the tank shroud cannot be reinstalled due to the increased diameter of these tanks. Only the stock 393cc aluminum tank or the 370cc carbon fiber tank can fit the stock tank shroud.

The 700cc tank build is only available with either the fixed M18 regulator or the Internal adjustable Huben Power Black Hawk Regulator. The Ninja Paintball Flex Reg is only available in 5/8″ thread.

The Flex Reg is only available for the stock 393cc Aluminum, 370cc carbon fiber, or 500cc carbon fiber tanks.

Select options
$500.00 – $650.00
HP G30 Copper
Hajimoto Gauntlet 30 – Copper Package
$500.00 – $650.00
This is the Copper Gauntlet 30 caliber build.

All of the packages we offer whether it is the Ultimate Package or the simple Copper Package, all ship to you after we completely check and verify that the rifle is not leaking, all fasteners are checked, and the entire rifle is inspected for missing parts or damage.

We make sure the action is performing correctly as well as shooting the rifle three times and reporting the shot string details and target.

The barrels are inspected and thoroughly cleaned prior to shooting so when you receive your dirty 30 is ready to deliver some hurty!

What you get in this Package:
- 1 new Umarex Gauntlet 30 Caliber ready to go.
- Optional externally adjustable regulator which comes with the extended fill fitting.
- Optional Build with Umarex Sidelever Cocking
See below for a detailed breakdown of what is included.

Ordering procedures:
You will add any and all items to your cart including this Turnkey Gauntlet 30 caliber. Please use the notes section to communicate any special requests like trigger preferences.

Lastly, if an item you want is out of stock and therefore you are unable to add it to the cart, you can use the notes section to request the item as part of your build and we will settle up before the airgun ships.

When I receive this order, I will build it based on the information provided, and before the airgun ships, any credits or additional charges need to be settled.
Select options

Installation video is listed below

All Gauntlet 1 Packages now come with an upgraded large 22ci tank!

Hajimoto Productions Gauntlet .30 SL Custom Builder