Regulator, Tanks & Parts - Hajimoto Productions LLC

$50.00
Reg Pressure Tester
HubenPower Regulator Tester
$50.00
High quality HubenPower reg tester.

Features
- Micro threaded activation knob.
- Built in quick action pressure relief knob.
- High pressure gauge to 6000 psi.
Don’t guess what the output of your Gauntlets regulator is, KNOW what it is especially if you are adding shims and need to hit a specific PSI output.

Designed to be used with any Paintball style Regulator that uses the industry-standard G1/2-14 Threads like those shown below.
Select options
$55.00
11.4cc plenum expansion for Avenger
Doux – Avenger Power Plenum
$55.00
AVENGER/LEVIATHAN POWER PLENUM:
- SIZE: 11.4cc
- STACKABLE
- BLACK ANODIZED WITH MATT BLACK GUN COATING
- TYPICAL PERFORMANCE INCREASE IS AROUND 20FT/S WITH NO OTHER MODIFICATIONS.
THIS PLENUM IS NOT DESIGNED TO NOT FIT THE BULL PUP VERSION

INSTALLATION CAN BE MADE USING TYPICAL SNAP RING PLIERS

MADE IN SOUTH AFRICA

Installation video below
Select options
$59.95 – $69.95
Microbore 4500PSI Extension
Ninja Microbore Fill Whip
$59.95 – $69.95
- 30% Lighter and Smaller than standard HPA hoses
- Extremely flexible 30 or 46 inch hose
- 4500 PSI working pressure
- Works with any HPA or CO2 system
- Made in USA
Select options
Sold out!
$110.00 – $175.00
PCP Air Compressor Filter 4500psi Oil Water Separator
$110.00 – $175.00

A quality water, oil and odor filter system designed to protect your PCP’s! Consider selecting the combinations that come with the extra-length fill whip so you can stand your filter up and down and still have plenty of slack to connect to your PCP.

Whether you are using a hand pump or a personal compressor it is vitally important that only clean dry air be introduced in your air reservoir.

Made from high-quality aircraft aluminum and is rated for safe use.

Don’t make the mistake of not drying your air as it will destroy regulators as well as your aluminum pressure vessels.

Select options
Sale!
$125.00 – $130.00
300CC 4.5K PSI M18 Threaded CF Tank
0.30L M18 Thread Carbon Fiber Tank
$125.00 – $130.00
Features
- Lightweight High Pressure Carbon fiber Cylinder
- 300cc/0.30L capacity
- Available in Gloss Or Matte
- 251mm x 55mm
- M18 Threaded
Shown Below On the HajiNotos
Select options
Sale!
Original price was: $150.00.Current price is: $130.00.
User adjustable M18 regulator
Huben Power Black Hawk Pro
Original price was: $150.00.Current price is: $130.00.
The Huben Power Black Hawk Pro is a very stable, high-flow M18 threaded adjustable regulator that allows the user to adjust the output pressure to what is required for the application. The quality of materials and craftsmanship is top-tier. We tested these regulators here at Hajimoto Productions and the standard deviation was so low it was incredible.

FEATURES
- Rotational bonnet allows for exact thread indexing/clocking of the regulator to the PCP.
- Streamline and slim structural design
- Thread: Bottle = M18*1.5 and PCP = G1/2-14
- Max up to 4500psi high-pressure gauge input.
- Regulating output pressure range 500psi~3600psi
- Comes with a standard 8mm quick disconnect male foster fitting adapter for filling.
- Dust caps may randomly be green or black.
- The regulator has a high airflow rate, is lightweight, easily operational, re-buildable, and designed for use with HPA/CO2.
Select options
Sale!
$135.00 – $140.00
360CC 4.5K PSI M18 Threaded CF Tank
0.36L M18 Thread Carbon Fiber Tank
$135.00 – $140.00
Features
- Lightweight High Pressure Carbon fiber Cylinder
- 360cc/0.36L capacity
- Available in Gloss Or Matte
- 9″ x 2.4″ (228mm x 61.5mm)
- M18 Threaded
Shown Below On the HajiNotos
Select options
$144.95
Ninja X Reg Custom Output Regulator up to 3100psi
Ninja High Pressure 5/8″-18UNF Custom Output Regulator
$144.95
5/8″-18UNF thread can be used on 3000PSI bottle as well. This regulator is built with the ball/pin and spring removed so hot swapping will not be able to happen.

We do include the ball/pin and spring should you happen to have a thin pin depression system capable of actually opening the valve. The only function of this pin/ball is to allow the tank to retain air if it is off of the PCP. This is a paintball thing and should not be used in in HPA.

You should never try to unscrew a high-pressure output paintball-style regulator while it is under pressure. You will destroy the threads as they are not designed to be threaded on and off under load. Degas and then remove the regulator and bottle. Read more in the following article https://hajimotoproductions.com/index.php/2024/11/11/regulator-thread-damage/

This is a direct replacement for the regulator found on the Gauntlets G1, G2 and G30 Caliber
```
Take advantage of a quality regulator for your high pressure application.

MADE IN THE USA!
Ninja HP regulator output pressures in increments of 100PSI.
Simply select your desired output pressure from 1100PSI TO 3100PSI
All custom built pressure units will have a +/- 50 psi tolerance.
```
Select options

Sold out!

$146.00

NEW MODEL

Pro V3 for 3K and 4.5K Cylinders

Ninja Pro V3 Regulator 5/8″ Thread

$146.00

The Hajimoto Ninja Paintball Pro V3 SHP in 5/8”-18UNF Thread with Stainless Steel Cap Threads

Ninja's Pro V3 SHP with rotional bonnet.
A perfect replacement for the regulator found on the on the Gauntlet 2.
A complete regulator rebuild kit is included!

MADE IN THE USA!
Ninja regulator output pressures in increments of 100PSI.
Simply select your desired output pressure.
Output ranges from 1100PSI to 2400PSI.
All custom built pressure units will have a +/- 50 psi tolerance.
Dont confuse the this regulator with the lower pressure SLP versions out there, there is a difference.

Select options

$150.00
Umarex Zelos Regulator by HubenPower
HubenPower Zelos Regulator
$150.00
- For Umarex Zelos
- Can be installed in 300bar/4500psi tank，Provides pressure reduction function for Umarex Zelos’ 300bar tank, reducing the 300bar/4500psi tank pressure to below 250bar/3625psi
- Installs directly without modification
- Rotary joint design, easy to adjust the position of the pressure gauge and fill nipple.
- Stainless steel material, strong and durable
- The factory set output pressure is approximately 22~24Mpa (3190~3480psi). This is not the final shooting pressure, Do not adjust!. （Do not turn the bottom adjustment knob if you are not sure what you are doing.）
- Umarex Zelos has an internal regulator. When you need to adjust the pressure for actual shooting, adjust the internal Zelos original regulator.
- Please do not adjust the output pressure of this product to more than 250bar (3625 psi)
- Comes equipped with a standard 8mm quick disconnect male foster fitting adapter for filling.
- The regulator has a high air flow rate, lightweight, easy operation, and re-buildable.
- Compatible with Air/CO2.
Select options
$154.95 – $155.00
Ninja High Pressure Metric M18 Custom Output
$154.95 – $155.00
Ninja Paintball is beginning to produce these with a polished brass bonnet. We will be forced to only offer the polished brass version once all the black steel bonnets are gone.

We do include the ball/pin and spring should you happen to have a thin pin depression system capable of actually opening the valve. The only function of this pin/ball is to allow the tank to retain air if it is off of the PCP. This is a paintball thing and should not be used in in HPA.

You should never try to unscrew a high-pressure output paintball-style regulator while it is under pressure. You will destroy the threads as they are not designed to be threaded on and off under load. Degas and then remove the regulator and bottle. Read more in the following article https://hajimotoproductions.com/index.php/2024/11/11/regulator-thread-damage/

The ball and spring are provided but removed from the regulator.
```
Take advantage of a quality regulator for your high pressure application.

MADE IN THE USA!
Ninja HP Metric regulator output pressures in increments of 100PSI.
This is a M18 threaded regulator made for M18 threaded bottles.
This will not fit Umarex Gauntlet Bottles which are 5/8"-18 Threaded.
Simply select your desired output pressure from 1100PSI TO 3100PSI
All custom built pressure units will have a +/- 75 psi tolerance.

If you need a low output build with a fixed out of of something between 
300 psi and 1100 psi, the CUSTOM pessure option and provide the output
desired in the notes.

If you are looking for a direct replacement for you Gauntlet2 .22, .25 & .30
You will want the 5/8"-18 Version that is found HERE
```
Select options

Sold out!

Ninja 13ci 3000PSI Air Tank with Pro V3 Regulator

$155.00

NEW MODEL

PRO V3 REG WITH 13CI TANK

Ninja 13ci 3000PSI Air Tank with Pro V3 Regulator

$155.00

Includes Hajimotos Pro V3 regulator with Stainless Steel Threaded rotional Cap. 
Say goodbye to gauges and foster nipples not lining up with the stock openings when the is installed tight.
A complete regulator rebuild kit is included!

This is an aluminum 13ci bottle that holds 3000PSI including a Pro V3 regulator with custom output pressures in increments of 100PSI.
Simply select the desired pressure in the dropdown.

Pressure Recommendations For Umarex Gauntlet Generation 1 .177, .22 and .25
Stock Gauntlet Gen1 .177/.22 | 13ci/3000/1100PSI Regulator
Gauntlet with STK Installed .177/.22 | 13ci/3000/1400PSI Regulator
Stock Gauntlet Gen1 .25 | 13ci/3000/1900PSI Regulator
Gauntlet with STK Installed .25 | 13ci/3000/2100 Regulator

Select options