Avenger Mods and Enhancements

$45.00
Bipod Picatinny
ATLAS LIKE Bipod
$45.00

Atlas Like Bipod

Select options
Sale!
Original price was: $65.00.Current price is: $45.00.
AR Stock Folder
Side Folding Stock Adapter
Original price was: $65.00.Current price is: $45.00.
A basic affordable stock folding adapter that allows your PCP to take up 30% less space in your bag or back pak. This basic folder is an excellent choice for anyone looking to improve the versatility and portability of their tactical style PCP.

FEATURES
- Aerospace grade aluminum. Matte Black Anodized finish.
- Modifiable for pass-through for hammer adjusters.
- Designed to fold to the left but can be made to fold right as well.
- Locks in the open and closed positions*.
- Compatible with AR15 and AR308 extension tubes.
- Works perfectly for the HajiNotos and Tactical Gauntlet Kits.
(* The hinge does have a certain amount of play when locked in either position.)
Select options
$47.00
Air Stripper, Tension Spring and Baffle Stack
HP Strip Stak Pak for Avenger
$47.00

UPDATE: The newer avengers have a screw-on barrel shroud and an end cap that is a two-piece unscrewable but the STP still fits and works without an issue. unscrew the shroud rather than the little screw shown in the video and simply unscrew the baffle washer array off the end cap and you are good to go.

Strip Stak Pak for the Avenger

A six piece kit that includes an efficient multiport air stripper that strips and channels air away from the pellet to allow for a more stable and less turbulent pellet launch from the muzzle. The kit also provides baffle chambers to help remove both noise and turbulence in the air stream. The end result is a more laminar air stream which reduces projectile instability and as a secondary benefit, reduces the report of the rifle. This kit is 100% compatible with the stock end cap or the DonnyFL A50 adapter.
Air Stripper comes with o-ring and silicone grease for installation. The installation video for the Umarex Origin Strip Stak Pak is exactly the same so you can follow the installation video below.

Replacement Air Stripper 0-ring is 14mm x 1.5mm

Select options
$49.00
Needed to install a bottle
Avenger Bull Pup Primary Adapter
$49.00

Here is our primary adapter that allows the installation of the Doux Tech on the Avenger Bull Pup PCP.
The primary adapter replaces the lower pressure tube adapter allowing the bottle adapter to be installed on the airgun.

You will transfer the o-ring from the Avengers pressure tube to the Primary Adapter.

Select options
Sale!
Original price was: $60.00.Current price is: $49.00.
M8, M10, and 1/8″ Threaded Digital Gauge
28mm Digital Pressure Gauge
Original price was: $60.00.Current price is: $49.00.
- 28MM Diameter
- M8, M10, or 1/8″BSP and 1/8″ NPT Threaded versions available
- Display in PSI
- Auto Shut off in 30 secs
- Digital Display 1% Accuracy
- Black Rubber Protective Sleeve
- Working pressure 0-4500psi
- Weight 32g
- Gauge body is made from high-grade brass
Select options
$55.00
11.4cc plenum expansion for Avenger
Doux – Avenger Power Plenum
$55.00
AVENGER/LEVIATHAN POWER PLENUM:
- SIZE: 11.4cc
- STACKABLE
- BLACK ANODIZED WITH MATT BLACK GUN COATING
- TYPICAL PERFORMANCE INCREASE IS AROUND 20FT/S WITH NO OTHER MODIFICATIONS.
THIS PLENUM IS NOT DESIGNED TO NOT FIT THE BULL PUP VERSION

INSTALLATION CAN BE MADE USING TYPICAL SNAP RING PLIERS

MADE IN SOUTH AFRICA

Installation video below
Select options
$60.00
Adjustable Butt Stock
Hogue Butt Stock
$60.00

SPECS
• Precision fit for military specification buffer tubes (diameter = 1.15″ / length = 7.25″)
• Material: OverMolded^® rubber / reinforced polymer
• Color: Black

FEATURES
• Perfect compatibility with Hogue OverMolded grips and forends
• Light-weight skeletonized reinforced polymer construction
• Anti-rattle and beard-safe design
• Collapses to user’s preferred shoulder position
• Polymer cap provides snag-free shouldering
• Rubber/polymer hybrid butt pad cushions recoil
• Multiple swivel sleeve and sling mounting positions

Select options
Sold out!
$88.00 – $325.00
Allows for a dual Reg Setup
AE Swede Avenger Bottle Adapter
$88.00 – $325.00

This is AE Swede’s bottle adapter and plug that allows the user to run dual regulators.
Here is where you will find the reg you need. Just select 3000PSI output.

Select options
Sale!
Original price was: $130.00.Current price is: $100.00.
Buck Rail
Avenger Grip Adapter V3
Original price was: $130.00.Current price is: $100.00.
The Grip Adapter is made from SLS Fused PA12 Nylon. It accepts AR Grips with or without beavertails. It accepts AR15 or AR308 extension tubes and threaded side folders. It uses an innovative two-point attachment method for a rock-solid attachment.

Made in the USA. SLS fused PA12 Nylon Construction. Lifetime Warranty

Add an AR Grip with or without beavertail to the AV Avenger

1-3/16×16 Threaded receiver accepts AR15 and AR 308 extension tubes

Innovative two-point attachment method makes for a rock-solid mount

Compatible with plenum and bottle conversions.
Select options
Sale!
$115.00 – $424.00
With or Without Cylinder
Doux Avenger Bottle Adapter
$115.00 – $424.00
Convert your Air Venturi Avenger into a bottle PCP!
- Adapter Threaded for M18 x 1.5 Air Cylinder.
- Option to add a 500cc or 700cc 4.5K Carbon Fiber Bottle.
- All Stainless Steel Construction.
Made in South Africa

Installation video below:
Select options
From $125.00
This Builder Starts With the Tactical Adapter
TacVenger DIY KIT CUSTOM
From $125.00

This is where you can build your own TacVenger Kit to install on your existing Avenger.

Only use this builder if you are including a carbon fiber bottle in the builder because the shipping fees are based on that item as a start. If you only want a couple of items, add them to your cart separately using the parts finder method and not this builder.

The Kit Starts with the Buck Rail Tactical. We are no longer using the AE Swede Chassis.

then you simply add the items you want in your kit and you are all set!

The WHT 4-16x16FFP scope comes with, a set of Picatinny scope rings and a Large Focus Wheel.

Select options
Sale!
$360.00 – $560.00
Complete with Cylinder, Power Plenum, Bottle Adapter and Barrel Band!
Avenger Power Pak Bundle
$360.00 – $560.00
Introducing the Hajimoto Productions Air Venturi Avenger Bottle Conversion Power Pak Bundle!

You get everything you need to convert your Avenger into a lean mean bottle toting machine in days not weeks.

In the Bundle you get:
- User selected .30Liter (300cc), .50Liter (500cc), .58Liter (580cc), or .70Liter (700cc) 4500PSI Alsafe Carbon Fiber CE Certified Cylinder
- Doux Technologies Stainless Steel Bottle Adapter Kit
- Doux Technologies Power Plenum
- Hajimoto Productions Barrel Band with Picatinny Rail for your Bipod
Bundles save you big money!

You receive all your parts in one box typically in 4 days or less …….. not weeks!

INSTALL VIDEOS LISTED BELOW
Select options