Description
Made for the Umarex Notos PCP
Works with red-dot or Scope. Does not work with Umarex fixed fiber optic
Haji-Notos Mag 11 rounds
$30.00
Introducing the Haji-Notos 11 Shot Expanded Magazine!
This is an expanded magazine for the Umarex Notos PCP. The magazine is a brand-new design that loads from the right and employs a removable magnetic lid for easy loading. Allow for a smooth and consistent chambering of rounds without issue.
Please note that our design loads from the right.
Be sure to install and remove the mag at least 10 times before using it so that it breaks into your mag well.
The Haji-Notos magazine is compatible with a red-dot or optic, but it does not work with Umarex fixed fiber optic sights. Please note that the actual finish may differ from that shown in the photos.
LOADING THE NOTOS MAGAZINE
9 in stock
You must be logged in to post a review.
You may also like…
-
$79.00FX No Limit Scope Rings 1″, 30mm and 34mm – 30mm/Dovetail
$79.00Add to cartTube/Rail Option: 30mm/Dovetail
-
$99.00Eaglevision INS Mount
Infinity INS Elevation Adjustable Scope Mount 30mm Ring Picatinny
$99.00Select options
Eaglevision has designed and developed an amazing scope mount that allows the scope to move vertically along a guided path. The mount is lockable in different positions using two screws. This mount can be used as a low profile or be adjusted to the high profile too if your scope objective is too close to your rifle barrel or shroud. These mounts resolve a lot of problems for shooters who like to shoot long range and often run out of adjustment clicks on their turrets.
The mount can also come in handy if you have not been able to use your favorite scope due to lack of space between the rings or the odd position of your dovetail or Picatinny rail on your gun. We are very proud of this product as it became a “must-have” for people who love their bullpups.
The best application of this mount however is for people who want to reach out further than their ordinary mounts allow them to. By keeping the front mount at its lowest and elevating the rear mount to the highest point you can zero in your gun far beyond your normal mounts allows you to, without using the clicks on your turrets hence keeping the optical center of your scope intact (the ideal situation for long-range shooting).Another great feature is these mounts allow the scope to be lifted to allow for large or expanded magazines.
Item includes:
- 2 x infinity scope mount.
- 2 x allen key (different sizes).
- 4 x spears screws.
- 1 x large spear screw.
- Protection ring fabric.
- Waterproof case.
-
$79.00FX No Limit Scope Rings 1″, 30mm and 34mm – 30mm/Picatinny
$79.00Add to cartTube/Rail Option: 30mm/Picatinny
Related products
-
$110.00Fits the G1, G2/G2SL or G30/G30SL
Real 2 Stage Trigger for the Gauntlet
$110.00Select optionsFull-fledged 2-stage trigger for the Umarex Gauntlet 1, 2, G30, bolt or sidelever variants. This trigger is a direct replacement for the single-stage trigger that ships with the Umarex Gauntlet. This trigger is a straightforward install that will increase the accuracy of your shooting due to a more predictable and consistent breakpoint.
- The Trigger Is Stainless Steel 17-4 Through Hardened
- The Trigger Shoe Is Aluminum 6061-T6
Please see the installation video below for more details.
Super Tune Kit Users
You must use the stock trigger return spring with the two-stage trigger as the trigger spring that comes with the Super Tune Kit is too light to be effective with the two-stage trigger. -
Sold out!
$18.50Umarex Gauntlet Regulator Shim Pak
$18.50Read moreHajimoto Productions Regulator Shim Kit For Umarex Gauntlet
I have put together a very easy and complete stainless steel shim kit so you can adjust your Gauntlets Regulator output. The shims that I have included give you a wide range of adjustability to mix and match different thicknesses to get the regulator to output exactly what you want. The shim kit comes with easy to follow instructions which guide you through the process as to what shims you need to add to typically achieve my recommendations for each Gauntlet Caliber.
The shim kit contains:
- 2 – #5 Shims.
- 1 – #3 Shim.
- 2 – #2 Shims.
(Two #2’s = One #4 | Two #5’s = One #10 | One #5 + One #3 = One #8, and so on)
To take a stock G1 .177/.22 from the stock 1100-1050PSI to my recommended 1350-1400PSI you would add two (2) #5 shims (10).
To take a stock G1 .25 from the stock 1900-1950PSI to my recommended 2100-2200PSI you would add one (1) #3 shim (3).
The included two #2 shims are for minor adjustments if you have a finicky regulator.DETAILED LESSON/EXAMPLE:
Let’s say your .22 Gauntlets regulator only puts out 1300PSI after installing the two #5’s when it should be 1350 to 1400PSI, you would add one #2 for a total of 12 to help get it there. If after the addition of the one #2, you’re still 50psi short so you would pull out the #2 and use the #3 for a total of 13.Always use a regulator output tester to confirm the output pressure of your regulator. It is the only safe and sure way to properly adjust the pressure of your regulator.
You have to fill and purge so the Belleville washers settle into the new preload. Be sure to slow fill your bottle the first time only to 500PSI and then purge it, fill slowly a second time to 1000, and then purge fill the final time slowly and watch to be sure the reg has settled and does not exceed your target pressure. If it does exceed your target pressure, stop filling, purge and shim less.
If you rapid fill, there is a good chance you will pop your burst disc.
-
Price range: $179.00 through $189.005/8″-18UNF Threaded Unit
Flex Reg Hajimoto Configurations
Price range: $179.00 through $189.00Select options
Ninja Paintballs’ Flex Reg with Custom Gauntlet Configuration.
Say goodbye to only one fixed output pressure!
The user has an 800 – 900 psi adjustment swing!
Requires minor forestock modification.
The regulator thread is 5/8-18UNF (Bottle Thread) and Typical Paintball Threads of .825-14 NGO (PCP Thread).
Please note the Flex regulator can be used with any Air, Co2, or Nitrogen driven air gun not just the Gauntlet, providing it has the correct threading.
The Ninja Flex regulator is available in any 900 psi spread to a maximum of 3100 psi output. For the Gauntlet, select the proper configuration.
If you select the Custom Configuration, you will need to use the NOTES above to communicate what you want the maximum output to be. Please note that the highest output the Flex Regulator can be configured for is 3100 PSI, but we can build it to any number below that. Example, a user wants the maximum output of their Flex regulator to be 2800, we will build the regulator so that the adjustable range of that build is 1800 to 2800PSI.How to read the below configurations
Example: Flex Reg .22 | 4500/1600 to 2400 psi
Flex Reg .22 = Regulator Type for .22 caliber
4500/ = The bottle’s maximum fill pressure
1600 to 2400 psi = The output range of the Flex RegFlex Reg Configuration For Generation 1 Gauntlet .177/.22 Cal
Stock .177/.22 | 3000/1100PSI Regulator
Flex Reg .177/.22 |3000/600 to 1500PSIFlex Reg Configuration For Generation 1 Gauntlet .25 Cal
Stock .25 | 3000/1900PSI Regulator
Flex Reg .25 | 3000/1500 to 2400PSIFlex Reg Configuration For Generation 2 Gauntlet .22 Cal
Stock .22 | 4500/1900PSI Regulator
Flex Reg .22 | 4500/1500 to 2400PSIFlex Reg Configuration For Generation 2 Gauntlet .25 Cal
Stock .25 | 4500/2100PSI Regulator
Flex Reg .25 | 4500/1500 to 2400PSIFlex Reg Configuration For G30 Cal
Stock .30 | 4500/2800PSI Regulator
Flex Reg .30 | 4500/2100 to 3100PSIComes with a dedicated Spanner Wrench for power adjustment. MADE IN THE USA!
Reviews
There are no reviews yet.