As most of you know I make Smackdown video which is a collection/collage of pest elimination scenarios. Well I am starting a new thing called "Smack Shot" which is a play on the word Snap Shot but Hajified with Smackdown.
This shot was taken using:
Umarex Gauntlet .22 Hajimoto Edition
Gamo 15.42gr ammo
Hawke SW 8-32x56 Scope
Scope Camera: Hajimoto Scope Camera Assembly
Video Capture:1920x1080 @120fps
This technique is not new as we have been doing this to Benjamin Marauder Magazines for years. The information is not new but the presentation in the Gauntlet realm is.
In this tutorial, I show you how to reduce or in most cases, eliminate the rotary magazine from damaging the skirts of your pellets. This technique can be used on the Benjamin Marauder mags as well.
Tools Required:
* 5/64" Allen wrench
* Compressed Air
* A rat tail file like those used for chainsaw sharpening.
Thank you for watching, please like, comment and subscribe!
I present to you Chipmunk Smackdown #8!! This is my first smackdown of 2018 featuring more chipmunk pesting here at camp Hajimoto. In this video, there are 6 chippers and 2 reds dispatched plus 2 chokes! LOL
About the rifle used:
Hajimoto Edition Umarex Gauntlet .22
The rifle has been completely torn apart and all metal openings have been deburred and polished with a hone and 1200 grit sandpaper. In this video I am shooting 16.66gr Skenko Ultrashocks at 870fps which develops just over 27FPE. The have my HP Baffles, HP Air Stripper, JSAR super tune kit, I have tweaked the regulator to 1350psi, transfer ports are opened and polished, hammer and tube are polished, barrel crown recut, breech has been reworked for smoother pellet feeding. The rifle gets over 95 full power shots per fill at its current power setting.
Below are some of the mods and equipment I used in producing this video.
*Hajimoto Edition Gauntlet .22*
utahairguns.com/umarex-gauntlet/
*HP Baffles*
youtube.com/watch?v=oTydXsVD_3k
*HP Air Stripper *
youtube.com/watch?v=8DTZxZBFpdU
*JSAR Super Tune Kit *
jsairrifles.com/Umarex-Gauntlet-Tuning-Kit_p_69.html
*Scope:* *HAWKE Sidewinder 30 8-32x56 AO Rifle Scope, Ill. 20x 1/2 Mil-Dot Reticle*
pyramydair.com/s/a/Hawke_Sport_Optics_Sidewinder_30_8_32x56_AO_Rifle_Scope_Ill_20x_1_2_Mil_Dot_Reticle_1_4_MOA_30mm_Tube/4332
*Ammo:* Skenko UltraShock .22 Cal, 16.16 Grains, Hollow Points
pyramydair.com/s/p/Skenco_UltraShock_22_Cal_16_67_Grains_Hollowpoint_100ct/899
*Scope Cam:* Custom mounted Hajimoto Scope Camera Assembly GoPro Hero 4 Black
*Camera #1:* iPhone 6s
*Camera #2:* Canon Vixia Camcorder
Thanks for stopping by and viewing my channel!
This video is a step by step tutorial on how to take a $8 Bluetooth selfie stick and use it as a bluetooth device activation trigger. Most every recording devices made today have Bluetooth capability so that you can remotely start and stop the camera or activate a sound device, or whatever you want. This makes it very convenient during a hunting scenario where you want to capture the kill on video but you don't dare take your eyes off the target.
Yep, another Gauntlet Tutorial! This time I walk through how to adjust your Tuning Kit and I show you what you can expect from your Gauntlet when all is said and done. All the shot strings I made were using the stock 13ci bottle that comes on the Gauntlet.
The first 10 shot string was made to help illustrate how the Gauntlet performs on LOW setting using the Umarex test pellet which is the RWS Hobby 11.9gr wadcutter pellet. I think you will agree that it smokes em down range like a boss.
The next shot string was made shooting the heavier and more common Crosman 14.3gr domes. The power setting was the same but I don't stop at 10 shots... I think you will be amazed at what happens next.
The power adjuster was turned 2 full turns from Low to Medium, Max power would not be too far away. I think 1 additional clockwise turn more and shots would be 40 or so at high power at over 920FPS.
The Installation video for the Super Tune Kit is:
https://youtu.be/hwIqGXnTVMY
Here is a Shot string of a stock Gauntlet .22 Caliber with the Super Tune Kit Installed
https://i.imgur.com/5ZcWtNd.jpg
Yet another pesting video with a mixed bag of red squirrels and chipmunks here at camp Hajimoto.
About the rifle used:
Benjamin Marauder GEN2
The rifle has been completely torn apart and all metal openings have been deburred and polished with a hone and 1200 grit sand paper. I shoot JSB 18.4GR at 920FPS = 34FPE. The regulator is set to whatever gave these results. The HUMA regulator bar indicator is very crude and it is near impossible to determine the actual bar setting. I removed my pressure gauge block so that I would maintain maximum air volume capacity in my air reservoir or else it would be simple to determine regulated pressure.
Below are some of the mods and equipment I used in this hunting video.
*Benjamin Marauder Gen 2 .22*
http://www.pyramydair.com/s/m/Benjami...
*HUMA Pressure Regulator*
http://www.huma-air.com/Benjamin-Mara...
*WAR SSG*
http://wickedairrifles.com/store.html
*Scope:* *UTG 30mm SWAT 3-12x44 AO*
http://www.pyramydair.com/s/a/UTG_3_1...
*Ammo:* JSB Exact Jumbo Heavy .22 Cal, 18.13 Grains, Domed
http://www.pyramydair.com/s/p/JSB_Mat...
*Video Capture:* GoPro Hero 4 Black
*Scope Cam Mount iPhone:* Custom made
Thanks for stopping by and watching my video. If you have questions please feel free to post them below.
Another gray squirrel hunting video. I get 2 more and these two were pretty difficult as they hid every time they heard a sound, finally I was able to get the drop on them first thing in the morning.
Enjoy the video.
About the rifle used:
Benjamin Marauder GEN2
The rifle has been completely torn apart and all metal openings have been deburred and polished with a hone and 1200 grit sand paper. I shoot JSB 18.4GR at 920FPS = 34FPE. The regulator is set to whatever gave these results. The HUMA regulator bar indicator is very crude and it is near impossible to determine the actual bar setting. I removed my pressure gauge block so that I would maintain maximum air volume capacity in my air reservoir or else it would be simple to determine regulated pressure.
Below are some of the mods and equipment I used in this hunting video.
*Benjamin Marauder Gen 2 .22*
http://www.pyramydair.com/s/m/Benjamin_Marauder_PCP_Air_Rifle_Synthetic_Stock/3139/6068
*HUMA Pressure Regulator*
http://www.huma-air.com/Benjamin-Marauder-pressure-regulator
*WAR SSG*
http://wickedairrifles.com/store.html
*Scope:* *UTG 30mm SWAT 3-12x44 AO*
http://www.pyramydair.com/s/a/UTG_3_12x44_AO_SWAT_Accushot_Rifle_Scope_EZ_TAP_Illuminated_Mil_Dot_Reticle_1_4_MOA_30mm_Tube_See_Thru_Weaver_Rings/3493
*Ammo:* JSB Exact Jumbo Heavy .22 Cal, 18.13 Grains, Domed
http://www.pyramydair.com/s/p/JSB_Match_Diabolo_Exact_Jumbo_Heavy_22_Cal_18_13_Grains_Domed_500ct/690
*Video Capture:* GoPro Hero 4 Black
*Scope Cam Mount iPhone:* Custom made
Thanks for stopping by and watching my video. If you have a question or comment, please post it below and please subscribe to my channel.
This video is a follow up to a video I did back in December of 2016
https://www.youtube.com/watch?v=jwOLKC0iAuo
as it relates to My Scope Cam Quest. This session I cover Hero modifications and a general overview of how I included night vision to have one of the most versatile scope capture configurations I have ever seen. Below are links to the previous video as well as links to all the components used in this build.
My scope has an eye relief of 71mm-83mm , after this build the eye relief is 15mm-20mm.
The following two links are to images that capture the completed assembly. One with the camera by closed and the other with it open:
http://i.imgur.com/xcZP3Ys.jpg
http://i.imgur.com/eGJtwT1.jpg
Below are some useful links to some of the things that I speak to in this video.
The replacement Hero 4 lens 6mm
https://www.peauproductions.com/collections/gopro-hero-4-black-silver-lenses/products/gp60016
Dead Eye Scope Cam Test video
Fieldsports Channel
https://www.youtube.com/watch?v=kcX47pdU3po
GoPro Hero4 Black
https://www.bhphotovideo.com/c/product/1078001-REG/gopro_chdhx_401_hero4_black_edition_adventure.html
Replacement 6mm Lens for GoPro to allow for IR filter removal
https://www.peauproductions.com/collections/gopro-hero-4-black-silver-lenses/products/gp60016
7" LCD HDMI screen
http://www.ebay.com/itm/7-inch-HD-HDMI-LCD-Display-Screen-Monitor-Black-With-VGA-HDMI-AV-Audio/172837370735
Micro HDMI (from GoPro) to HDMI Cable (to 7" Screen)
https://www.amazon.com/gp/product/B071L7N7LH
GoPro Waterproof Camera Case
https://www.amazon.com/Vicdozia-Underwater-Blackout-Waterproof-Housing/dp/B016MUV1G8
Orion Steady PIX Deluxe Camera Mount
https://www.amazon.com/Orion-5338-SteadyPix-Deluxe-Camera/dp/B0069VXY7K
Accutact AngleSight
http://www.365airsoftshop.com/element-utact-angle-sight-ex251bk-p-2535.html
CellusNZ Creations
http://www.shapeways.com/product/SSS7BN4SY/gopro-scopecam-mount
CellusNZ YouTube Page describing mount
https://www.youtube.com/watch?v=Qa1fiWjppFs
Angle Sight Scope Cam Forum Post
http://www.airsoftsniperforum.com/33-lounge/12698-gopro-scopecam-project-angle-sight.html
Homedepot supplied 2" x 2' ABS pipe
http://www.homedepot.com/p/VPC-2-in-x-2-ft-Plastic-ABS-Pipe-1202/202300519
Home Depot Supplied Felt Blanket
http://www.homedepot.com/p/Everbilt-4-1-2-in-x-6-in-Heavy-Duty-Self-Adhesive-Felt-Blankets-2-per-Pack-49950/203661133
Teds Hold Over
https://www.youtube.com/user/EdgunUSA
Please be sure to understand our return policies prior to making your purchases. All products offered on our website are intended for use on airguns only. It is a violation of Federal Law to use a product in a manner inconsistent with its intended labeling or use. It is the purchaser's responsibility to know the ordinances and laws of their state or county and to fully comply with them. Dismiss