Yep! another gray squirrel smackdown! Sorry for the weak video capture rate I did not realize it was on 30 frames per second!
Oh Well .... enjoy!
Well the Gray Squirrel hunting season is open here in Massachusetts and this video of one of many to come that captures me getting my daily limit.
DISCLAIMER: This video is meant for educational & documentary purposes only. All work on airguns and airgun accessories should be carried out by a proficient licensed professional. Hajimoto Productions Channel will not be held liable for any injury or damage resulting from attempting to duplicate anything shown in this video. By viewing this video, you are acknowledging the contents of this disclaimer.
####At minute marker 6:25 the SPACER ####
#### part#25 does NOT get reinstalled. I don't ####
#### mention this but I don't install it either ####
#### do not install the spacer. ####
I install a modification kit that takes the Gauntlet from 60 shots per fill to over 105 shots per fill using the stock 13 cu. inch removable tank.
The 37-minute installation video details the complete disassembly of the Gauntlet and step-by-step installations of the Valve modification, Hammer Spring, Power Adjuster, and Trigger spring.
I refer to the owner's manual and the schematic drawing throughout the process so you will be able to refer to it at any point during the installation. If you need to see a parts schematic I have one here for your use: https://drive.google.com/open?id=1GUs...
***UPDATE***
1) If you are having the air leak out of the barrel as fast as you put air in, here are some steps to correct the issue.
2) Please note that I say and show the adjustment hole to be 5/16" which you can reduce to 1/8" if you measure correctly.
When I tune rifles for customers that hole is only 3/32". SANDPAPER BURNISHING TECHNIQUE
1) Make sure the gun is safe.
2) Cock the rifle so there is nothing pushing the poppet open.
3) If it still leaks you may have to do perform a more aggressive poppet valve burnishing technique as detailed in Travis's video here: https://youtu.be/WS9v3-QUSX0?t=146
Here is a Shot string of a stock Gauntlet .22 Caliber with the Super Tune Kit Installed https://i.imgur.com/5ZcWtNd.jpg
DISCLAIMER: This video is meant for educational & documentary purposes only. All work on airguns and airgun accessories should be carried out by a proficient licensed professional. Hajimoto Productions Channel nor YouTube will be held liable for any injury or damage resulting from attempting to duplicate anything shown in this video. By viewing this video, you are acknowledging the contents of this disclaimer.
In this video, I tear apart my .22 Benjamin Marauder Generation 2 PCP to swap out the heavy 36.5oz stock steel pressure tube with a lightweight 12.37oz Jefferson State Air Rifles Aluminum Pressure Cylinder.
The rifle will be torn down and reassembled with a JSAR Aluminum Air Cylinder, JSAR SS Balanced Valve, JSAR Super Hammer, JSAR TSS GEN2 and Huma regulator. The rifle will weigh almost 2 pounds less when this is all said and done. The MROD had most of these modifications already installed in the MROD but I never documented the installation but have been promising you guys that I would, well here it is!
I walk through every step and reference the Benjamin Marauder Schematic so you can follow along. All the parts other than the Huma Regulator for this build were purchased from Jefferson State Air Rifles. The Huma Regulator was from trenieroutdoors.com.
MARAUDER ALUMINUM AIR CYLINDER, GEN 2
http://www.jsairrifles.com/Marauder-A...
MARAUDER SUPER HAMMER
http://www.jsairrifles.com/Marauder-S...
MARAUDER TWIN SPRING SYSTEM (TSS) GEN 2
http://www.jsairrifles.com/Marauder-T...
HUMA REGULATOR BENJAMIN MARAUDER .22
https://www.trenieroutdoors.com/gear/...
If you have any questions about any of the parts you have seen in this video be sure to contact
Jefferson State Air Rifles at: sales@jsairrifles.com or
For Phone Orders Please Call: 1-833-257-2477 Extension 1
For Technical Support Please Call: 1-833-257-2477 Extension 2
Special Thanks to Travis Whitney for all your help man.
This is my submission to the Skinny Mitch Bottle cap challenge.
Umarex Gauntlet, 50 Yards 4 bottle caps... nothing but net!
Testing the Gamo Hunter 15.42gr pellets in my Umarex Gauntlet .22 caliber. In the still/thumbnail you can see a group directly below the target, that group is 20 shots at 50 yards.
I adjusted the scope to zero for these pellets at 50 yards and the rest is history. These pellets perform very well in the Gaunty, I'm impressed.
A video that captures my continuing struggle to have a stable scope camera mount platform that will be to capture through the scope so I can share my shooting experiences.
As it relates to hammer bounce, you are absolutely correct that there is hammer bounce, but the shot chip chosen to demonstrate the old config (chipmunk shot) was prior to an HDD and then WAR SSG install. If you listen to the new configuration you will notice you do not hear the bounce anymore. At some point in my videos, I say and list that I installed a hammer debounce device, in those videos there were some shots with and some without the device installed. The issue is if you have an iPhone 6 on edge in its Z axis and the hammer traveling on the Y axis introduces those forces on the iPhone which in turn vibrates on the Y axis on the phone causing the phone to flex and in turn a blurry image. Because the phone is so thin, it essentially turns into a diving board BOING!. A better complete phone length plate to better support the phone might help eliminate the boing effect.
On my adventure through the scope mount trail, there are many other crafty people whom have shared their creations so we all can benefit from their ideas. The only credit that I am worthy to receive is the lighting of the dark road that others have made. I did not design the 3D component used it is the brainchild of CellusNZ.
My scope has an eye relief of 71mm-83mm , after this build the eye relief is 15mm-20mm.
The following two links are to images that capture the completed assembly. One with the camera by closed and the other with it open:
http://i.imgur.com/xcZP3Ys.jpg
http://i.imgur.com/eGJtwT1.jpg
Below are some useful links to some of the things that I speak to in this video.
Hajimotos scope cam on a Gamo rifle
https://www.youtube.com/watch?v=p2JrJ7xPnrw
Dead Eye Scope Cam Test video
Fieldsports Channel
https://www.youtube.com/watch?v=kcX47pdU3po
GoPro Hero4 Black
https://www.bhphotovideo.com/c/product/1078001-REG/gopro_chdhx_401_hero4_black_edition_adventure.html
GoPro Waterproof Camera Case
https://www.amazon.com/Vicdozia-Underwater-Blackout-Waterproof-Housing/dp/B016MUV1G8
Orion Steady PIX Deluxe Camera Mount
https://www.amazon.com/Orion-5338-SteadyPix-Deluxe-Camera/dp/B0069VXY7K
Accutact AngleSight
http://www.365airsoftshop.com/element-utact-angle-sight-ex251bk-p-2535.html
CellusNZ Creations
http://www.shapeways.com/product/SSS7BN4SY/gopro-scopecam-mount
CellusNZ YouTube Page describing mount
https://www.youtube.com/watch?v=Qa1fiWjppFs
Angle Sight Scope Cam Forum Post
http://www.airsoftsniperforum.com/33-lounge/12698-gopro-scopecam-project-angle-sight.html
Homedepot supplied 2" x 2' ABS pipe
http://www.homedepot.com/p/VPC-2-in-x-2-ft-Plastic-ABS-Pipe-1202/202300519
Home Depot Supplied Feld Blanket
http://www.homedepot.com/p/Everbilt-4-1-2-in-x-6-in-Heavy-Duty-Self-Adhesive-Felt-Blankets-2-per-Pack-49950/203661133
Teds Hold Over
https://www.youtube.com/user/EdgunUSA
As most of you know I make Smackdown video which is a collection/collage of pest elimination scenarios. Well I am starting a new thing called "Smack Shot" which is a play on the word Snap Shot but Hajified with Smackdown. This is Number 4 in the series.
This shot was taken using:
Umarex Gauntlet .22 Hajimoto Edition
Crosman Premier Dome 14.13
Hawke SW 8-32x56 Scope
Scope Camera: Hajimoto Scope Camera Assembly
Video Capture:1280x720 @240fps
As most of you know I make Smackdown video which is a collection/collage of pest elimination scenarios. Well I am starting a new thing called "Smack Shot" which is a play on the word Snap Shot but Hajified with Smackdown. This is Number 3 in the series.
This shot was taken using:
Umarex Gauntlet .22 Hajimoto Edition
Crosman Premier Dome 14.13
Hawke SW 8-32x56 Scope
Scope Camera: Hajimoto Scope Camera Assembly
Video Capture:1280x720 @240fps
As most of you know I make Smackdown video which is a collection/collage of pest elimination scenarios. Well I am starting a new thing called "Smack Shot" which is a play on the word Snap Shot but Hajified with Smackdown. This is Number 2 in the series.
This shot was taken using:
Umarex Gauntlet .22 Hajimoto Edition
Crosman Premier Dome 14.13
Hawke SW 8-32x56 Scope
Scope Camera: Hajimoto Scope Camera Assembly
Video Capture:1280x720 @240fps