Ninja Paintball has finally delivered my long-awaited flex reg order from 6/2021!
The Flex Reg has went through some design changes but still operates exactly the same as before. You can expect 800 to 900 PSI of adjustable range. When ordering your Flex always think of what the maximum output will be and then subtract 800 from that. So if you think 2400PSI is your max then you would want the 1600-2400PSI. Again it is not uncommon to actually achieve a 900PSI and sometimes 1000PSI adjustment range.
The new design now has two burst discs, one to protect the high pressure tank side and another to protect the air rifle.
Notice the two burst disc’s now
Please note, we build them to the maximum output so you will never exceed the maximum. So in the case of the 1600-2400PSI Flex I just described you could end up with 1500-2400PSI or even 1400-2400PSI.
I have 22.5ci Carbon fiber tanks in stock which fit the Gauntlet 1 tank shroud with a little sanding and the 22.5ci carbon fiber tank fits the Gauntlet 2 tank shroud with any sanding at all. You will just need to drill one hole in the bottom of the forearm tank cover so you can attach your fill hose.
The gauges will be on the left and the right in full view so there is no more looking on a slant below the barrel shroud to see your fill pressure.
The regulator is a 5/8″-18UNF thread so it can be used as a direct replacement to any original regulator configurations. It takes special tools and methods to separate a regulator from its tank. Most are red thread locker glued on.
We do offer regulator mounting services should you opt to have us do it for you but typically you will find that for only a little more money than the Flex and the mounting service you can purchase a tank and regulator built system.
Be sure to swing by and take a look at the different options available from aluminum tanks, carbon fiber to just stand-alone Flex regs that are built to your custom output request.
https://hajimotoproductions.com/index.php/product-category/parts/regulators-tanks/
2 thoughts on “Hajimoto is Flex’n again”
prescottautorepairllc February 16, 2022 at 1:52 PM
will this regulator work on a Hatsan Hercules bully if stock clearance is not a issue? I cannot confirm what the thread size of the bottle adapter into block looks the same? Would Hajimoto know this?
Hajimoto March 10, 2022 at 3:06 AM
It will not work on a Hatsan product.